Upwork home
Sign up
Secondary

Hire the best HVAC System Designers in Canada

Check out HVAC System Designers in Canada with the skills you need for your next job.
Get started
  • $60 hourly
    • 4.8/5
    • (28 jobs)
    Hello there! 😊 💥 Innovating Beyond Limits in Energy & Mechanical Engineering 💥 I am Reza Basafa, a mechanical engineer with a master’s degree and over 7 years of experience in building energy modeling, HVAC optimization, mechanical system design, and renewable energy integration. My expertise spans across computational simulations, energy efficiency consulting, and automation, enabling businesses, architects, and engineers to optimize their projects for a greener, more efficient future. 🔍 My Expertise Includes: 🏅 **LEED Certification & Sustainability Consulting** – Supporting green building projects with LEED, BREEAM, Green Globes, and Living Building Challenge certification processes. 🖥 **Energy & Mechanical System Modeling** – Proficient in EnergyPlus, DesignBuilder, IESVE, Revit MEP, AutoCAD, and PVsyst for high-performance building and mechanical system design. 📚 **Energy & Mechanical Performance Codes Compliance** – Extensive knowledge of ASHRAE 90.1, Title 24, NECB, NCC, UKBR, IECC, and EPBD for energy and mechanical system code adherence. 📚 **HVAC System Design & Simulation** – Expertise in designing and optimizing HVAC systems for energy efficiency using Revit MEP and computational tools. 📚**Mathematical & Computational Modeling** – Solving engineering problems using MATLAB for numerical analysis, simulations, and performance evaluations. 📚 **Automation & Scripting** – Developing Python-based automation solutions for engineering workflows, data processing, and energy performance analysis. 📚 **FEM & CFD Analysis** – Conducting structural, thermal, and fluid flow simulations for mechanical components and energy systems. ✅ **Indoor Environmental Quality (IEQ) Assessments** – Conducting daylight analysis, thermal comfort evaluations, and natural ventilation studies to enhance occupant well-being. ☀️ **Renewable Energy Integration** – Expertise in solar PV feasibility studies and compliance with IREC, IEEE 1547, and regional standards for seamless renewable energy adoption. 📑 **Energy Audits & Performance Evaluation** – Conducting ASHRAE 211, ISO 50002, and ENERGY STAR-compliant audits for energy efficiency improvements. 🏭 **Carbon Footprint Reduction** – Implementing GHG Protocol, ISO 14064, and industry-specific guidelines to support low-carbon and sustainable development initiatives. 📊 **Energy Management Systems (EMS) & Automation** – Designing and implementing ISO 50001, ANSI/ASHRAE 135, and ISO 27001-compliant EMS for effective energy monitoring and optimization. 📘 **Policy & Regulatory Compliance** – Navigating ASHRAE standards, DOE ESPC programs, FEMP guidelines, and sector-specific regulations for mechanical and energy projects. 📉 **Cost-Benefit & ROI Analysis** – Performing IPMVP-based performance verification, NPV & ROI calculations, and investment evaluations for energy and mechanical system projects. With a deep understanding of mechanical engineering principles, building energy modeling, and cutting-edge simulation tools, I am dedicated to delivering innovative and efficient solutions tailored to your needs. Whether it’s optimizing HVAC systems, automating engineering tasks, conducting detailed simulations, or integrating renewable energy solutions, I bring precision and creativity to every project. 📩 Let’s collaborate to bring your energy-efficient and mechanical engineering visions to life! 🚀♻️
    Featured Skill HVAC System Design
    EnergyPlus
    DesignBuilder
    Product Design
    Data Analysis
    Photorealistic Rendering
    Energy Engineering
    ANSYS
    SolidWorks
    Machine Learning
    Finite Element Analysis
    Python
    MATLAB
    3D Modeling
    Mechanical Engineering
  • $30 hourly
    • 5.0/5
    • (82 jobs)
    Highly experienced mechanical engineer with over 30 years of experience in MEP, product design, and CAD design especially in Solidworks and Revit.
    Featured Skill HVAC System Design
    Mechanical Engineering
    MEP Design
    Industrial Design
    Product Design
    Mechanical Design
    Drafting
    Autodesk AutoCAD
    Autodesk Revit
    SolidWorks
    CAD
  • $30 hourly
    • 5.0/5
    • (19 jobs)
    Greetings and thank you for exploring my Upwork profile! As a licensed PE and PENG with over sixteen years of expertise across five states in the US and Canada, I specialize in HVAC, Electrical, and Plumbing engineering, coupled with a strong foundation in construction design and drafting. Here's a snapshot of my services: MEP & FP ENGINEERING:- - Design expertise in Commercial, Residential, Hospitals, Mixed-use, and Schools. - In-depth knowledge of codes, including IMC, IPC, NEC/NFPA, IECC, LEED, and local state codes. - Proficient in creating BID/PERMIT and Construction documents using Revit, BIM pro, AutoCAD, and other engineering software. - Utilization of SKM Power Tools and ETAP for simulations, ensuring optimal performance. - Streamlined project timelines through comprehensive management of permit application and approval processes. - Detailed Shop Drawings and efficient handling of Requests for Information (RFI) for project clarity. BIM MODELLING:- - Proficient BIM Drafting Services for accurate representations. - Detailed BIM Modelling services up to Level of Development (LOD) 400 for comprehensive project visualization. - MEP & FP BIM services ensuring seamless integration of all components. - Implementation of advanced techniques for BIM Clash Detection and expert Collision removal. - Creation of comprehensive designs through the development of Revit families. Why Choose My Services:- - Unmatched expertise in MEP engineering and BIM modelling. - Proven track record of delivering projects within tight budgets without compromising quality. - Adept at managing complex projects with a keen focus on harmonious design integration. - Extensive experience as a designer and technical leader, ensuring project success. - Assurance of compliance with city and state building codes, backed by my professional stamp. - Portfolio showcasing sample drawings from past projects, providing insights into my capabilities. - Commitment to delivering top-notch quality services with a swift turnaround to meet project deadlines. For inquiries or more details, please feel free to reach out. I am eager about the prospect of collaborating on your upcoming projects!
    Featured Skill HVAC System Design
    BIM Clash Detection
    Title 24
    Plumbing
    Electrical Design
    Drafting
    ETAP
    Mechanical, Electrical & Plumbing Systems
    3D Modeling
    Trace 700
    HAP
    Autodesk AutoCAD
    AutoCAD HVAC Loads Calculations
    Autodesk Revit
    MEP Design
  • $60 hourly
    • 4.8/5
    • (6 jobs)
    I can help with following services - Modelling Tools - IES-VE , Trace 3DPlus, Openstudio, Ladybug, Revit, DB - Energy Modeling for LEED, NGBS, Austin Energy, Nyserda, Green Globes, TGS, SB-10, BC Step Code, Title 24, NECB, NYSERDA, MLI Select CMHC - Daylighting, Shading, Envelope, Thermal comfort, Bioclimatic and HVAC Analysis - Renewable energy potential and feasibility studies - ASHRAE I, II Energy and Water Audits - LEED MEP Credits and fundamental commissioning. Thanks, Ankush
    Featured Skill HVAC System Design
    EnergyPlus
    eQUEST
    Trace 700
    IES
    Title 24
    Energy Management
    LEED Standard
    MEP Design
    Energy Engineering
    LEED Consulting
    Building Energy Certification
    Energy Optimization
    Energy Simulation
    Energy Modeling Software
    SketchUp
  • $48 hourly
    • 5.0/5
    • (1 job)
    I am a certified Architectural designer and Structural engineer. I have 10 years of experience designing residential, commercial and other architectural buildings in a variety of sizes and styles. I am working with our professional architect and structural engineering team. I have extensive experience with US building Code (IBC, IRC, CBC, FBC, OBC, CPHD, etc...) I also have extensive experience in millwork and shop drawings for furniture design. Mastered Revit, AutoCAD, ArchiCAD, and SketchUp for all architectural design services as well as Revit, AutoCAD, SketchUp, 3ds Max, V-ray, Corona, Enscape and Lumion for 3D modeling and renderings. Our areas of expertise include: -Architectural design service: architectural 3D Rendering and modeling, 3D floor plan, Exterior, interior. -Architectural drawing service: Full set CD, DD, MEP, HVAC, Blueprints, Site plan. -Structural drawing service: CMU wall details, Structural calculation reports and analysis (SAP/STAAD), concrete, steel, and cold-formed steel, timber, masonry -Civil drawing service: Civil plans, Infill grading plans, Runoff calculations. -Stamp Service: FL, NY, NJ, PA, WY, TX, AZ, WA, AL, AR, CA, CO, CT, DE, DC, GA, HI, ID, IL, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, MY, NV, NM, NC, OH, OG, RI, SC, TN, UT, VT, VA, WV, WI PE license.
    Featured Skill HVAC System Design
    Industrial Design
    Commercial Design
    Residential Design
    Adobe Photoshop
    2D Design & Drawings
    Furniture Design
    Interior Architecture
    Autodesk AutoCAD
    SketchUp
    3D Architectural Rendering
    Autodesk Revit
    Civil Engineering
    MEP Design
    Architectural Design
  • $40 hourly
    • 4.7/5
    • (64 jobs)
    I will bring your concept to reality and make it a success. I will assist you in Engineering design, Computer-Aided Design, Finite Element Analysis, Computational Fluid Dynamics, MATLAB/PYTHON/STATA/JAVA programming. My set of skills: * 2D/3D Drafting/Modelling and Assembly - I make use of AutoCAD, Autodesk Inventor, Solidworks, Creo, ANSYS, MATLAB etc. to model, assemble and produce well-detailed drawings of simple/complex mechanical/civil equipment. * Technical Documentation and Presentation - I can document your final model using tools like 3D renderings, animations, production drawings and bill of materials and generation of concise reports. I will convert your CAD drawings into your desired format like PDF, DXF, STEP, JPEG, etc. * CAD simulations - Finite element analysis of 2D/3D structures, computational fluid dynamics of thermo-fluid systems and generate concise reports. * Writing MATLAB/Python codes for different problems like heat transfer, stress/strain, finite element analysis, basic/complex math, etc.
    Featured Skill HVAC System Design
    Rapid Prototyping
    Finite Element Analysis
    AutoCAD HVAC Loads Calculations
    Engineering Design
    Python
    MATLAB
    Computational Fluid Dynamics
    Autodesk
    Autodesk Inventor
    CATIA
    SolidWorks
  • $30 hourly
    • 5.0/5
    • (5 jobs)
    Hello! I am an expert Structural Engineer & MEP Architect with 7 years of experience in designing structures and building systems. 🔹 Services I Offer: ✅ Structural Analysis & Design ✅ MEP System Design & Integration ✅ Building Information Modeling (BIM) ✅ Energy Efficiency Optimization ✅ Cost Estimation & Value Engineering ✅ Construction Documentation & Support 🔹 Tools I Utilize: ✅ AutoCAD ✅ Revit ✅ ETABS ✅ SAP2000 ✅ Navisworks ✅ HAP (Hourly Analysis Program) ✅ E-Quest ✅ MATLAB ✅ SolidWorks ✅ Bluebeam ✅ Microsoft Project 🔹 Why Choose Me? ✅ Exceptional Quality: I am committed to delivering high-quality solutions that meet and exceed client expectations. ✅ Timely Delivery: I make sure timely completion of projects without compromising on quality. ✅ Client Satisfaction: Your satisfaction is my ultimate goal. I strive to build long-term relationships based on trust and reliability. Looking Forward, Ahmad Waqas.
    Featured Skill HVAC System Design
    Point Cloud to BIM
    3D Modeling Software
    3D Modeling
    Autodesk Fusion 360
    Chief Architect
    CAD & CAM Software
    Civil Engineering
    Autodesk Revit
    Autodesk AutoCAD
    Structural Engineering
    MEP Design
  • $40 hourly
    • 0.0/5
    • (0 jobs)
    PROFESSIONAL SUMMARY * Proficient Mechanical Building (HVAC) design engineer with more than 15 years of experience in the design, calculation, MEP system and equipment selection for commercial, residential, and institutional buildings. * Using engineering software for load calculation (Trace 3D plus, Carrier HAP), 3D modeling (Revit/BIM360/SolidWorks) and 2D drawing (AutoCAD). * Having experience in the manufacturing field, Design, and modeling of automated packaging machinery for food and pharmaceutical industries, 3D modeling, using SolidWorks and Inventor software. * Working with Standards and Codes: ASHRAE, CNB, CSA, ASTM, ASME B31-3, ASME SECVIII, API 5L, API 650. * With extensive experience in designing and selecting technologies for industrial ventilation, gas-solid separation, and liquidsolid filtration, I bring a strong familiarity with the standards and norms applicable to gas and liquid treatment processes.
    Featured Skill HVAC System Design
    Modeling
    CAD
    Mechanical Engineering
    Engineering & Architecture
    Energy
    AutoCAD HVAC Loads Calculations
  • $40 hourly
    • 0.0/5
    • (0 jobs)
    I’m an electrical design engineer specializing in 2D and 3D wiring harness design for heavy-duty machinery and industrial equipment. With years of hands-on experience, I bring precision, efficiency, and a deep understanding of international electrical standards to every project. 🔧 What I offer: 2D electrical schematics and single-line diagrams 3D harness routing using industry-standard CAD tools Complete Bill of Materials (BOM) and manufacturing documentation Custom solutions tailored to your machine, vehicle, or equipment Support for prototyping, testing, and production phases ✅ I’ve worked on a wide range of electrical systems, from complex industrial machines to off-road and heavy equipment. My goal is to deliver harness designs that are robust, cost-effective, and easy to assemble, with an emphasis on clarity and quality. Whether you're a startup developing your first prototype or a manufacturer seeking to optimize your electrical systems, I’m here to help. Let’s collaborate to bring your electrical design project to life — efficiently and professionally.
    Featured Skill HVAC System Design
    Modeling
    Automotive Engineering
    Electrical Engineering
    Electrical Drawing
    Electrical Design
    Siemens NX
  • $40 hourly
    • 0.0/5
    • (0 jobs)
    A dedicated Mechanical Engineering Professional and QA/QC expert with over 10 years of experience specializing in MEPF building commissioning projects. Skilled in HVAC, Plumbing, and Fire protection design, commissioning, and managing MEPF systems, with a proven track record of delivering projects that meet stringent quality standards. Expert in implementing Quality Management Systems (QMS), conducting audits, and managing project quality processes using advanced tools like Procore, CX planner, Autocad, Revit, and MS Project. Adept at leading teams of Design engineers, installation technicians, and quality officers, providing training, and ensuring compliance across large-scale, complex construction projects. Strong leadership skills, a deep understanding of engineering principles, and a commitment to continuous improvement in the delivery of high-quality projects.
    Featured Skill HVAC System Design
    AutoCAD HVAC Loads Calculations
    Modeling
    Construction
    Construction Monitoring
    CAD Conversion
    CAD
    Engineering & Architecture
    Mechanical Engineering
  • $45 hourly
    • 0.0/5
    • (0 jobs)
    I’m a mechanical designer and energy modeler with experience in HVAC, plumbing, and fire protection design for healthcare, residential, and data center projects. Whether you’re looking to optimize building systems, meet energy standards, or achieve net-zero design, I can help. Skilled with Revit, AutoCAD, IESVE, TRACE 700, and energy modeling tools. I can support your project from concept design all the way through construction and site coordination. Clear communication and teamwork are important to me, so let’s stay connected.
    Featured Skill HVAC System Design
    Plumbing
    AutoCAD HVAC Loads Calculations
    CAD Conversion
    CAD
    Construction Monitoring
    Construction
    Mechanical Engineering
    Engineering & Architecture
    Energy
  • $60 hourly
    • 0.0/5
    • (0 jobs)
    A seasoned professional with extensive experience in Industrial & Commercial sales, technical support, and management within the pumps industry. Proven ability to lead teams, develop sales strategies, and build strong customer relationships. Passionate about driving business growth through innovative solutions and exceptional customer service.
    Featured Skill HVAC System Design
    Sales Management
    Industrial Engineering
    Wastewater Management
    Water Treatment Engineering
    Sales
    Application
  • $23 hourly
    • 0.0/5
    • (0 jobs)
    Summary - Experienced in project management, product design and entrepreneurship - Strong communication and interpersonal skills developed through customer service and teamwork - Ability to clarify processes and communicate it in efficient manners. - Fluent in English and French - Ability to learn and apply complex concepts in very short time and under stress Engineering skills - Programming in C/C++, Python, MATLAB/Simulink, and basics in Linux - Modelling mechanical concepts with SolidWorks, Fusion 360, StarCCM+, AutoCAD - Capstone project involving HVAC design iteration of a building (NTU method, heat gain…) - Mastered the use of a Gantt Chart with task management, and schedule - Have strong notion of engineering design iteration processes through several design courses Research and analytical skills - Data research and classification of dimensions of the human body part to size an elector-mechanical belt designed to assist walking - Self-taught in complex electronics concepts to create automatic systems with micro-controller - Researched about Magnus effect aircrafts and their performance Communication skills - Performed a presentation of the final project in front of 60 students - Wrote final design reports - Maintained dynamic communication in a student association by sending emails and calls Technical skills - Manually dissected mechanical systems for study and/or optimization Relevant courses and favorites courses: “Aerodynamics”, “Mechanical Vibration Analysis”, “Technology Entrepreneurship”, “Electronics for Mechanical Engineers”, “Mathematics for Engineers”, “Dynamics of Machinery”, “Engineering Design”, “Engineering Materials II”
    Featured Skill HVAC System Design
    Microsoft Office
    Excel Formula
    HEAT Software
    Autodesk AutoCAD
    Solid Edge
    Autodesk Fusion 360
    Manufacturing
    NI Multisim
    Mechanical Design
    C++
    MATLAB
    SolidWorks
  • $20 hourly
    • 0.0/5
    • (0 jobs)
    I am a talented mechanical engineer with extensive experience in Mechanical, Plumbing, Fire protection and HVAC design of Commercial, Residential, Hospitals, Hotels and Educational Facilities. I can provide the following services: Mechanical HVAC: Design for all A/C systems, Heat Loads Calcs, Ventilation Requirements, Ducting, Piping, etc.. - Sanitary & Drain: Indirect Waste, Direct Waste, Rain Water, Grey & Black Water, Lift Stations, Booster Pumps, Pipe Sizing, Loads Sizing, Riser Diagrams, Equipment Selections, etc.. - Water Supply: Domestic Water, Hot Water, Return Hot Water, Loads Calcs, Pipe Sizing, Equipment Selections, Grey Water, Fertilizer System, Riser Diagrams, etc.. - Gas: Loads Calcs, Piping, Sizing, Riser Diagrams, Propane/CO2 Tanks sizing, etc.. - Fire Protection: Hydraulic Calcs, Piping, Pipe Sizing, Sprinkler Selections, Fire Pumps Selections, Jockey Pumps Selections, Water Storage Tank Calcs, Riser Diagram, etc.. Codes Expertise: - American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) - American Society of Plumbing Engineers (ASPE) -National Plumbing Code(NPC) - International Building Code (IBC): IMC, IPC, IFC, IECC - Uniform Building Code (UBC): UMC, UPC - National Fire Protection Association (NFPA): NFPA 10, NFPA 13/13R/13D, NFPA 20 - Canada Standards Association (CSA) - Technical Standards and Safety Authority (TSSA) Software Skills: - AutoCAD - Revit - CHVAC (Heat Loads Calcs) - WrightSoft Manual JSD (Heat Loads, Ducting and Selection) - Duct Sizer - Fire-Elite (Fire Hydraulic Calcs and Pipe Sizing) - Pipe Flow Expert (Liquid and Gas Networks Calcs) - Bluebeam Revu - MS Office
    Featured Skill HVAC System Design
    Life Cycle Assessment
    Cost-Benefit Analysis
    Cost Analysis
    Time Management
    Load Calculation
    Residential Design
    Problem Solving
    Microsoft Excel
    Fire Protection Engineering
    Mechanical, Electrical & Plumbing Systems
    Commercial Design
    AutoCAD HVAC Loads Calculations
  • $15 hourly
    • 5.0/5
    • (2 jobs)
    ⭐⭐⭐⭐⭐ "Hamza demonstrated an unparalleled proficiency in both SolidWorks and AutoCAD, showcasing an impressive command over the intricacies of design and engineering". I offer a premium service to my clients – I am hyper-responsive, available all days of the week and offer quality 2D & 3D CAD and drafting services with rapid turnarounds. I have a 8+ years of professional design experience (Mechanical Engineer) and have worked for internationally recognized companies including Tenaris, Packages Ltd. & Halton Group. My portfolio showcases diverse and intricate designs, from mechanical components to large-scale industrial layouts, all underpinned by a deep commitment to engineering excellence. I am here to offer high-quality, tailored solutions in AutoCAD, SolidWorks, and Revit for your engineering and design projects. Talk to you soon! - Mohammad Hamza
    Featured Skill HVAC System Design
    Microsoft Excel
    Floor Plan Design
    Concept Design
    Product Development
    CAD Conversion
    CAD Drafting
    CAD
    Autodesk Revit
    2D Design & Drawings
    3D Modeling
    Mechanical Engineering
    SolidWorks
    CATIA
    Autodesk AutoCAD
  • $30 hourly
    • 0.0/5
    • (0 jobs)
    Are you looking for a reliable and detail-oriented AutoCAD draftsperson who understands not just how to draw, but why those drawings matter? I bring 3 years of hands-on experience working in Canada for a commercial kitchen ventilation manufacturer. My main role was to support the sales and engineering team by preparing accurate drawings and estimates based on architectural plans. I specialize in: 🏗 Interpreting architectural/construction drawings 🔧 Calculating airflow requirements 📐 Selecting appropriate hood and fan sizes ✏️ Creating and editing AutoCAD drawings using templates 📊 Preparing professional estimates and technical documentation I’m not just a draftspersonn—I’m someone who supports the full process, from technical interpretation to client-facing deliverables. Tools & Skills: - AutoCAD (2D drafting) - Microsoft Excel (calculations, quote sheets) - Technical drawing reading (HVAC/ventilation focus) - Communication with sales and engineering teams Languages: - Japanese (native) - English (fluent, TOEIC 990, worked in Canada) - French (conversational) I’m a calm communicator, a fast learner, and committed to delivering accurate, production-ready work. Whether you need a reliable drawing assistant, support with estimates, or someone who can help bridge technical communication gaps—I’m here to help. Let’s work together to bring your project to life.
    Featured Skill HVAC System Design
    Japanese
    Technical Design
    Estimator
    2D Drafting
    Autodesk AutoCAD
  • $60 hourly
    • 0.0/5
    • (0 jobs)
    Seasoned Professional Sales Leader & Trusted Advisor within Heavy Industry, Oil & Gas, Mining, Agriculture, Food & Beverage, Municipal, OEMs, Wastewater, Forestry, Pulp & Paper, Automation, Automotive. Track record of exceeding territory sales targets by building strong Trusted Advisor relationships with all customers. Ensure Customer Satisfaction, repeat business & brand loyalty in order to achieve corporate goals. Specialized in Prospecting, Value/Solution Selling/Closing Deals. President & Chief Engineer @ Blue Orion Mechanical Services, based in Southwestern Ontario. Blue Orion Mechanical Services offers top-tier Mechanical Engineering Solutions to enhance your equipment's reliability and maintenance program. Our expert services focus on minimizing production losses and optimizing performance through the use of proper Preventative & Predictive Maintenance practices. We have over 17 Years of experience in Mechanical Engineering with a Licensed P. Eng (PEO-ON).
    Featured Skill HVAC System Design
    Management Skills
    High-Ticket Closing
    Lead Generation
    Customer Acquisition
    Customer Relationship Management
    Investigative Reporting
    Solution Selling
    Problem Solving
    Data Analysis
    Sales Leadership
    Sales & Marketing
    Mechanical Engineering
  • $30 hourly
    • 0.0/5
    • (0 jobs)
    S.M. Saiduzzaman, B.Sc. (Mech), M.Sc. (Clean Energy), MBA (Finance) Mechanical Engineer | Energy Systems Expert | Technical Writer| Wind, Solar, Hydro Expert I am a seasoned mechanical engineer with over 12 plus years of experience in energy systems optimization, renewable energy integration, Clean Energy Project Feasibility Studies, Project Management , Data Analysis and technical writing. Holding a Master’s in Clean Engineering from University of British Columbia (UBC), Vancouver, Canada and an MBA in Finance, I offer a unique blend of technical expertise and financial insight. My Expertise Includes: 1. Energy Systems & Feasibility Analysis In-depth experience in feasibility studies and performance evaluations for solar, wind, geothermal, and combined-cycle energy systems using RETScreen Expert. 2. Technical Writing & Documentation High-quality technical reports, research papers, and documentation in energy systems, HVAC design, and project management or any science related topic or business 3. Thermodynamic & Fluid Mechanics Analysis Advanced skills in thermodynamics, heat transfer, and fluid mechanics, Power Engineering and Power Economics for system optimization and efficiency improvement. 4. Engineering Economics & Project Management Application of economic analysis for energy projects, ensuring both technical and financial optimization. 5. Academic Tutoring & Resume Writing Tailored assistance in Physics, Math, Finance, and Engineering topics, along with professional resume and cover letter writing.
    Featured Skill HVAC System Design
    Physics Tutoring
    Engineering Management
    Tutoring
    Microsoft Excel
    Feasibility Study
    Solar Energy
    Wind Energy
    Energy Optimization
    Energy Engineering
    Energy
    Energy Modeling Software
    Energy Management
    Energy & Utilities
    Thermodynamics
  • $30 hourly
    • 0.0/5
    • (0 jobs)
    I am a Mechanical Engineer with a specialization in HVAC and Refrigeration. Certified in AutoCAD Revit and experienced with SolidWorks. Whatever your project size or needs I am happy to take on new challenges. My skills include design, bid building, report preperation, budget management, unit price analysis, and parts procurement, thermal load calculations from HAP and design interpretation.
    Featured Skill HVAC System Design
    Price & Quote Negotiation
    Engineering & Architecture
    Design Simulation
    Design Analysis
    HAP
    Mechanical Design
    Mechanical Engineering
    SolidWorks
    Microsoft Excel
    AutoCAD HVAC Loads Calculations
    Autodesk Revit
    CAD Conversion
    Modeling
    CAD
  • $26 hourly
    • 0.0/5
    • (0 jobs)
    7 years of experience in designing mechanical building systems, focusing on healthcare facilities and lab-enabled buildings. Demonstrated expertise in sustainable building practices and collaboration with cross-disciplinary teams. Proven ability to manage projects from concept to completion while ensuring compliance with industry standards and exceeding client expectations. Chartered Engineer (CEng) registered with the UK's Engineering Council and LEED AP (BD+C) certified, committed to driving innovation and sustainability. Eligible hold of Open Work Permit. • Expertise in designing building mechanical systems for diverse projects, ensuring compliance with applicable codes and standards. • Proven ability to lead multidisciplinary teams, manage schedules, and deliver integrated designs. • Experience in consulting with clients to develop specifications and deliver detailed engineering reports. • Proficient in AutoCAD, Carrier Hourly Analysis Program (HAP), and Microsoft Office suite. • Experience in BIM MEP model review using Revit and Navisworks. • Professional communication skills in English, Cantonese, and Mandarin.
    Featured Skill HVAC System Design
    AutoCAD HVAC Loads Calculations
    Modeling
    Mechanical Engineering
    Energy
    CAD
  • $15 hourly
    • 0.0/5
    • (0 jobs)
    I'm a Mechanical Design Specialist with hands-on experience in designing and selecting HVAC-R components for industrial and commercial systems. I support clients across sectors such as Oil & Gas, Mining, Pulp & Paper, Food & Beverage, and Power Utilities. 🔹 Expertise includes: HVAC-R component selection for complex systems 2D drafting and 3D modeling using CAD software Creating detailed Bills of Materials (BoMs) Custom mechanical design solutions for industrial environments I focus on delivering accurate, efficient, and industry-compliant designs that help clients achieve performance and reliability. Whether you need detailed CAD drawings, BoM preparation, or complete design support for HVAC-R systems, I’m here to help. Let’s connect to discuss your project!
    Featured Skill HVAC System Design
    Piping Design
    2D Design
    3D Design
    SolidWorks
    Energy
    Mechanical Engineering
    CAD
  • $30 hourly
    • 0.0/5
    • (0 jobs)
    Detail-oriented Mechanical Engineer with 6+ years of experience in 2D and 3D design, drafting, and product development in industrial manufacturing environments. Proficient in SolidWorks, GD&T, and design for manufacturability. Strong background in producing precise technical drawings, creating accurate BOMs, and collaborating with cross-functional teams to improve design efficiency and support production operations. Seeking to contribute CAD and design expertise to support the creation of high-performance products in heavy industries.
    Featured Skill HVAC System Design
    Architecture
    Modeling
    Project Management
    Polymer Engineering
    Injection Mold
    Injection Mold Design
    Plastic
    Autodesk AutoCAD
    Autodesk Inventor
    SolidWorks
    CAD Drafting
    Mechanical Engineering
    CAD
  • $50 hourly
    • 0.0/5
    • (0 jobs)
    I am a mechanical engineer specializing in the design and calculation of building mechanical systems, with a strong focus on HVAC and plumbing. I have experience in residential projects and proficiency in designing and drafting mechanical systems using Revit and AutoCAD. My expertise includes performing heating and cooling load calculations using Carrier HAP, designing plumbing and drainage systems, and developing HVAC solutions for buildings. Additionally, I am skilled in preparing bill of materials (BOM) to ensure accurate project execution. I am always eager to expand my knowledge, stay updated with industry advancements, and apply innovative solutions to engineering challenges.
    Featured Skill HVAC System Design
    Autodesk AutoCAD
    Mechanical Design
    Autodesk Revit
    Mechanical Engineering
  • $28 hourly
    • 0.0/5
    • (0 jobs)
    I am a Mechanical Engineer Technologist with experience with HVAC systems as well as designs. Along with that I have a background in AutoCAD, Revit, Autodesk Inventor, mechanical designs, Thermodynamics, Statics, Dynamics and a strong math background. Since finishing school i entered the workforce with an HVAC company and have almost been doing that for a year. I also have experience with technical writing which I do enjoy doing along side my HVAC work. I like knowing the small details of jobs and really understanding what is needed for the job. I have an eye for detail and good organizational skills.
    Featured Skill HVAC System Design
    Writing
    Mathematics
    CAD
    Mechanical Engineering
    Autodesk Revit
  • $25 hourly
    • 0.0/5
    • (0 jobs)
    ’m an adventurous and curious thinker with a deep passion for engineering and innovation. I believe in exploring beyond the obvious—whether it’s discovering how things work, designing smarter solutions, or learning new technologies. As a Mechanical Engineering Technologist in training, I thrive on turning ideas into reality through creative problem-solving and hands-on design. I’m always ready to explore new challenges, think beyond boundaries, and grow both personally and professionally. Engineering isn’t just a career path for me—it’s a mindset, a way of seeing the world, and a lifelong passion.
    Featured Skill HVAC System Design
    Microsoft Excel
    Autodesk Inventor
    Inventory Management
    Autodesk AutoCAD
    Autodesk Fusion 360
    3D Animation
    Modeling
    CAD
    Mechanical Engineering
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Top cities for HVAC System Designers in Canada
Show more