Hire the best Mechanical Designers in New York

Check out Mechanical Designers in New York with the skills you need for your next job.
  • $200 hourly
    * Supervising Engineer * Plan Review / PE Stamping * Project Management * Building / Mechanical Code Compliance * Drawing / Specification Package Preparation * BIM/VDC * Certified Commissioning Authority (CxA) Professional Engineer licensed in the following states: CA - California FL - Florida IN - Indiana NM - New Mexico NY - New York OH - Ohio TX - Texas Extensive experience designing HVAC, mechanical, refrigeration, plumbing, and high-performing advanced control systems in various building types and sizes across residential, healthcare, commercial, industrial, manufacturing, aviation, higher education, and combined heat and power markets. I have an extensive understanding of the International Building, Mechanical, Plumbing, Fuel Gas, Fire, and Residential Codes, as well as NFPA, ASHRAE, ASME, ANSI, and ASSE standards. All designs are performed in 3D with Autodesk Revit, or other CAD / BIM programs per request. Mechanical Systems of Note: -Hot Water Boiler -Low and High Pressure Steam -Chilled Water -Process Cooling -Combined Heat and Power Plants (CHP) / Cogeneration / Trigeneration -Central Refrigeration Systems (Ammonia / CO2 Cascade, Transcritical CO2) -Geothermal -Heat Pumps (ground, water, air source) -VAV Variable Air Volume, Low / Medium / High Pressure duct systems -VRF / Energy Recovery Ventilation -Industrial HVAC / Hazardous Exhaust Systems -Heat Recovery Finite Element Analysis: Advanced piping design. FEA pipe stress test analysis for thermal stresses on power piping, high-pressure steam, low temp refrigeration, process piping, and other pipe systems. Expertise with the following ASME piping codes: -B31.1 Power Piping -B31.3 Process Piping -B31.5 Refrigeration Piping and Heat Transfer Components -B31.9 Building Services Piping -BPE Bioprocessing Equipment (Pharmaceutical Process Piping) Computational Fluid Dynamics: CFD for advanced HVAC and thermal/fluid designs. Simulations of smoke control systems, data center cooling design, large open atrium, industrial HVAC and process piping, etc. Preconstruction Coordination / BIM / VDC: I model 2D plans in 3D and perform clash detection to ensure interdisciplinary coordination before construction. In addition, I have a 3D laser scanner which I use to generate extremely accurate 3D point clouds for use in Revit, Navisworks, and AutoCAD to generate precise as-builts. Energy Engineering: I have extensive experience analyzing and simulating existing and new energy systems to identify energy conservation measures. These systems include boilers, chillers, compressors, air systems, thermal oxidizers, industrial processes and heat recovery opportunities. I am able to leverage powerful tools built into Excel such as Power Query, as well as programmable Open Modelica simulations of energy systems. In addition, I provide life-cycle, NPV, IRR calculations to establish project feasibility. Software Capabilities: Autodesk Revit Autodesk Plant3D Autodesk AutoCAD Autodesk Navisworks Manage / Simulate Autodesk ReCap Pro Autodesk Inventor Pro Nastran In-CAD FEA Matlab Open Modelica Python Simulink Simscape Danfoss Coolselector2 Carrier HAP Hourly Analysis Program MS Office / Excel / Power BI
    Featured Skill Mechanical Design
    Process Engineering
    MEP Design
    Energy Simulation
    Energy Engineering
    Energy Management
    HVAC System Design
    Building Design
    Building Information Modeling
    Plant Design
    Plumbing
    Mechanical Engineering
    Computational Fluid Dynamics
    3D Design
  • $125 hourly
    A product designer with over a decade of experience with design and manufacturing. I offer services such as product design and development; 3D modeling and rendering; shop drawings; sheet metal parts and flat patterns; and file generation for CNC machining, 2D cutting and 3D printing. My experience and services also include: *Custom fabrication and prototyping *Furniture, fixture and hardware *Weldments *Onshape Certified Professional *2D to 3D conversion *Shop drawings *Mechanical drawings *Mechanical animation Tryout my online, real time view experience: cad.onshape.com/documents/138c466b18ed54f5fe578f83/w/8360de01a2f8a273eebfc476/e/1645fa2cc4a7e34553e170e8
    Featured Skill Mechanical Design
    Engineering Design
    Project Management
    Management Skills
    Research & Development
    Onshape
    Product Design
    Product Development
    Autodesk AutoCAD
    2D Design
    3D Rendering
    3D Modeling
    3D Design
    SketchUp
  • $30 hourly
    We specialize in delivering exceptional results in 3D printing and 3D modeling to provide our clients with prototypes that bring their ideas to life. Our expertise in these fields enables us to provide a comprehensive solution, bridging the gap between the virtual and physical world. Using cutting-edge technology and techniques, we bring our clients' visions to reality by providing them with tangible representations of their designs. Our commitment to delivering high-quality prototypes showcases our technical proficiency and demonstrates our dedication to helping our clients achieve their goals and bring their products to market.
    Featured Skill Mechanical Design
    Wood Engraving
    Laser Cutting & Engraving Software
    Engraving
    Injection Mold
    Mechanical Engineering
    Rapid Prototyping
    3D Printing
    Autodesk AutoCAD
    3D Design
    CAD
    2D Design
    Prototyping
    3D Modeling
  • $50 hourly
    I am a mechanical design engineer with over 30 years of experience in the design of plastic products and plastic injection molds. I have brought hundreds of products from concept-to design-to prototype-to production. I have designed hundreds of injection molds- Multicavity, Two-Shot, Valve Gated Hot Runner, Servo Driven,
    Featured Skill Mechanical Design
    Injection Mold Design
    CAD Drafting
    Product Design
    Custom Part Design
    Motion Graphics
    2D Design
    Autodesk Inventor
    3D Rendering
    Autodesk AutoCAD
    3D Modeling
    Blender
    3D Design
  • $150 hourly
    Are you looking for precision, reliability, and expert results in property surveying and drafting? You're in the right place! Based in New York City, I specialize in commercial and residential property surveying, offering nationwide services to meet your unique needs. My services include: 🔹 As-Built Plans, Elevations, and Sections – Providing meticulous documentation that ensures accuracy and clarity for your projects. 🔹 3D Modeling – Transforming properties into stunning, detailed 3D visuals using Revit and SketchUp. 🔹 Aerial Photography – Offering comprehensive property perspectives with professional drone imagery. 🔹 Custom CAD Shop Drawings – Crafting tailored, high-quality designs to match your exact needs. Why Work With Me? ✨ Proven Expertise: Over a decade of experience in surveying, CAD drafting, and design. ✨ Top-Notch Tools: Proficient in AutoCAD, Revit and SketchUp to deliver cutting-edge designs. ✨ Client-Centric Approach: Reliable, timely communication and a commitment to exceeding expectations. Let’s make your next project a success! Message me today to discuss how I can bring your vision to life with precision and care.
    Featured Skill Mechanical Design
    Drawing
    Floor Plan Design
    Land Surveying
    Drafting
    Survey
    Autodesk AutoCAD
    SolidWorks
    SketchUp
    3D Modeling
    3D Design
    CAD Drafting
    CAD
    Adobe Photoshop
  • $250 hourly
    ⭐⭐⭐⭐⭐ Top 1%, Expert-Vetted Industrial Designer with Over 100 Successful Projects. /// "Mikhail has been an absolute star!" / "Mikhail balances stunning design with functional engineering" / “Mikhail is top class freelancer..” / "He always thinks outside the box and finds great solutions." -- just a few quotes from Clients' reviews. ⭐️ Expert-Vetted Freelancer: Top 1% of all talent on Upwork ⭐️ 15+ years experience, 100+ products designed ⭐️ Among clients: Samsung (Germany), Martini, Porcelanosa (Spain), Seymourpowell (UK) etc Award winning industrial designer. Experienced in injection moulding manufacture, CNC milling, woodworking technologies, glass and ceramic, acrylic solid surface technologies, leather and fabric goods. Visited lots of factories and suppliers in China and Europe. Engineering and mechanical design skills. Please take a look at my portfolio below. SERVICES Market and trend research / Concept and ideas / Sketching, fast 3D modelling, conceptual renderings / UX / ergonomics / CAD / Photo realistic renderings / 3D and 2D Specs for manufacturing / Graphic design / naming / logo design / Supervision for production on factory or remotely / Marketing and ID guideline for promo HONOURS & AWARDS ⭐️ Jury member of Lexus Design Award ⭐️ IF Design Award. Authoritative award from Germany. As Art Director of the project. ⭐️ A’Design Award Authoritative award from Italy. As a designer. ⭐️ DESIGN AND DESIGN AWARDS Award from France. Design of the day (several times). ⭐️ Member of Expert Council of ADD INTERNATIONAL DESIGN AWARD 2018 Award trophy designer. ⭐️ More than 100 publications in design magazines and news: DAILY MAIL, THE HUFFPOST, METRO, MSN NETWORK, THE INDEPENDENT, WALLPAPER, ICON, YANKO DESIGN, GIZMODO, ETC ⭐️ More than 30 industrial and design exhibitions around the world: USA, RUSSIA, GERMANY, HONG KONG, SWEDEN, DENMARK, ITALY, UK etc. ⭐️ One of top 10 best contemporary designers, according to the British “THE CULTURE TRIP” magazine Keywords: Industrial designer, product designer, furniture design, plastic enclosure, creative design, mechanical engineering, product sketches, manufacture, concept design, 3d visualisation, photorealistic renders, CAD modelling, packaging, electronic device, product development, ideation, consumer electronic, lightning design, concept sketches, 3d modelling, prototype, mock up
    Featured Skill Mechanical Design
    Sketching
    Industrial Design
    Concept Design
    3D Rendering
    Health & Wellness
    Siemens NX
    Product Design
    Electronic Design
    3D Design
    Product Development
    CAD
    SolidWorks
    3D Modeling
    Design for Manufacturing
  • $50 hourly
    Ryan Clancy is an engineering and tech (mainly, but not limited to those fields!!) freelance writer and blogger, with 5+ years of mechanical engineering experience and 10+ years of writing experience. He's passionate about all things engineering and tech, especially mechanical engineering, and bringing engineering down to a level that everyone can understand. Ryan lives in New York City, and writes about mechanical and all other types of engineering and tech, at sites such as Engineering360, Electronics360, All About Cookies, EngineeringClicks, Clinked, Bricsys, FinanceBuzz, Mechanical Engineering HQ, and many more. Please reach out to me if you have any questions, I would love to discuss your next project!
    Featured Skill Mechanical Design
    SEO Writing
    Copywriting
    Writing
    Website Copywriting
    Engineering Design
    UX Writing
    Engineering & Architecture
    Content Creation
    Ebook Writing
    Content Writing
    Blog Writing
    Creative Writing
    Tech & IT
    Design Writing
    Education
    Article Writing
    Technical Copywriting
    Technical SEO
    Technical Writing
  • $60 hourly
    I enjoy taking ideas and sketches and turning them into reality. I utilize Solidworks to develop models, assemblies, and drawings. With knowledge and experience in manufacturing and design, your products will be created with precise detail and final purpose in mind. In addition to my strengths in CAD drafting and design, I can develop bill of materials (BOMs), manufacturing process instructions, and ensuring products are manufacturable.
    Featured Skill Mechanical Design
    DXF
    Autodesk Fusion 360
    Design for Manufacturing
    2D Drafting
    Custom Part Design
    CAD & CAM Software
    CAD
    2D Design
    SolidWorks
    3D Modeling
    CAD Conversion
    CAD Drafting
  • $80 hourly
    I am a knowledgeable MEP engineer with 14 years of experience throughout the United States. Much of my experience was gained from commercial high-rise, commercial fit-out renovation, retail, residential, critical facility, and healthcare facility related project design. My most recent focus has been related to general utility and emergency power distribution, crypto mining site selection & MEP design, solar / PV system electrical design, and Electric Vehicle Charging Station (EVCS) site layout & electrical design. I hold an active engineering license in 39 states / US territories. I'm eager to become a member of your team in hopes of offering insight based on technical knowledge I have gained throughout my career. There is no limit to the size or complexity to your project to attract my interest.
    Featured Skill Mechanical Design
    Electrical Layout Design
    Fire Protection Engineering
    Power Distribution
    Electrical Design
    Data Center Design
    Electrical Engineering
    Mechanical Engineering
  • $38 hourly
    ⭐⭐⭐⭐⭐ 𝗘𝗫𝗣𝗘𝗥𝗧 𝗜𝗡 𝟯𝗗 𝗗𝗘𝗦𝗜𝗚𝗡 & 𝗣𝗥𝗢𝗗𝗨𝗖𝗧 𝗗𝗘𝗩𝗘𝗟𝗢𝗣𝗠𝗘𝗡𝗧 - I specialize in turning great ideas into real, working products. What I Do Best: ✅ Product Design & Development: I create designs for new products that are great-looking, reliable, and high-performing. ✅ SolidWorks & 3D Modeling: Using tools like SolidWorks, I make detailed 3D models of products. ✅ 3D Design & Industrial Design: My skills in 3D design and industrial design help make practical and stylish products. ✅ Mechanical Engineering & 3D Rendering: I use my mechanical engineering knowledge to create realistic 3D images of these designs. ✅ Adobe Photoshop & Illustrator: I use Photoshop and Illustrator to add the finishing touches for all things graphic design. ✅ Mechanical Design & Prototyping: I design mechanical parts and make prototypes to test how well they work. ✅ CAD (Computer-Aided Design): I use CAD software to make precise drawings and models of products. Why Work With Me? ✅ Simple Communication: I explain things clearly and ensure we understand each other. ✅ Results You Can See: From big companies to individual clients, I have helped many turn their ideas into real products. ✅A Partner You Can Trust: When you work with me, you can relax knowing your project is in good hands. Let's Make Your Idea a Reality!
    Featured Skill Mechanical Design
    CAD
    Prototyping
    Adobe Illustrator
    Adobe Photoshop
    3D Printing
    3D Rendering
    Mechanical Engineering
    Industrial Design
    3D Design
    3D Modeling
    SolidWorks
    Product Development
    Product Design
  • $55 hourly
    Hello. I am a professional architect and engineer leading a team of US based Licensed/Registered engineers (PE). Our work experience have been concentrated on architecture, Structural engineering, Civil engineering & MEP engineering for Building permit. We specialize in architectural and structural design for residential to commercial buildings in the U.S. and Canada. We provide full set of detailed drawing according to design requirements and Building code. And ready the drawing for permit. Our Area of Expertise: -Architectural design: Foundation Plan, Floor plan, Elevation, Section, Roof details -Structural Design & Calculations (Wood, Concrete & Steel) -Expert in Civil Engineering drawing -MEP (HVAC, Electrical & plumbing) design & drawings. - 2D drafting in AutoCAD/ Revit - High quality 3D modeling, rendering and animation - Sketchup, blender, Lumion and V-ray etc. Clients satisfaction are my top priorities.I am available 24/7 Looking forward to working with you. ✔️Thanks✔️
    Featured Skill Mechanical Design
    Unreal Engine
    SolidWorks
    Autodesk Revit
    Autodesk AutoCAD
    HVAC System Design
    MEP Design
    SketchUp
    3D Modeling
    CAD Drafting
    Architectural Design
    Structural Analysis
    AutoCAD Civil 3D
    Civil Engineering
    Structural Engineering
  • $78 hourly
    Let me help you with your project! I'm a professional engineer with over 10 years of experience in residential and commercial industry, especially development and review of all design / construction documents for constructability, compliance with the client mandated scopes of work, building codes and third party review requirements,. I love all aspects of architecture and have experience in every stage from schematic design to construction administration. I feel strongly that my breadth of experience will speak for itself and that I can assist you within a given budget and timeframe. I have worked on a variety of project types and sizes and am very experienced in the full architecture process. I love to work with clients to understand their needs and turn them into reality. Whether you have a solid design in mind or you need someone to offer design solutions, I am happy to help. No detail is too small and I always consider all aspects of a project when bringing it to life. If something is important to my client, it's important to me. I'm a firm believer that a successful project is always a product of team effort between the client, architect, and builder. Whatever you need, I can help you with your project. I look forward to working with you!
    Featured Skill Mechanical Design
    Quantity Surveying
    Bill of Quantity
    Material Take-Off
    Autodesk
    Specifications
    Interior Architecture
    Commercial Design
    MEP Design
    HVAC System Design
    Civil Engineering
    Building Design
    Residential Design
    Structural Engineering
    Architectural Design
  • $40 hourly
    This is Dennis Mitchell, a Professional Engineer and Architect with extensive experience in Mechanical, Electrical, and Structural engineering. I lead a dynamic team that delivers innovative engineering solutions for Residential, Commercial, and Industrial projects. With a proven track record of managing complex projects, I have collaborated with diverse clients to deliver tailored solutions that meet stringent regulatory standards and project goals. My experience includes leading multidisciplinary teams in the design and execution of infrastructure projects, optimizing building systems for energy efficiency, and ensuring structural integrity through advanced analysis techniques. I am well-versed in various codes and standards, including the International Building Code (IBC), National Electrical Code (NEC), and ASHRAE standards, ensuring compliance across all states. ⭐Technical Skills √ Site Development: Site plans, grading, drainage, and stormwater design, hydrologic and hydraulic engineering. √ Architectural Design: Floor plans, elevations, sections and landscape planning. √ MEP Design: Mechanical, electrical, plumbing, HVAC systems and Fire protection systems. √ Structural Engineering: Plans for residential, commercial and industrial building using materials like wood, aluminum, steel, reinforced concrete (RC), and light gauge steel (LGS) √ Energy Compliance: Title 24 calculations and reviews ⭐Software and Tools √ Drafting and Modeling: AutoCAD, Revit, Civil 3D √ Structural Analysis: STAAD.Pro, SAP2000, ETABS √ Mechanical Design and Simulation: SolidWorks, ANSYS, HVAC design software √ Electrical Systems Analysis: MATLAB, Simulink, SKM Power Tools √ Architectural Visualization: SketchUp, Rhino, Lumion ⭐Code Proficiency: √ Structural Codes: IBC 2018, AISC 360-10, ACI 318-14, NDS 2018, ASCE 7-16 √ Electrical & Mechanical Codes: NEC, NESC, NEPA 70E, IEEE, ANSI, NEMA √ General & Specialty Codes: IRC, CBC, FBC, IFC, IPC, UBC, ADA, AASHTO
    Featured Skill Mechanical Design
    Building Plan Set
    Building Renovation
    Structural Calculation Sheet
    Structural Drawing
    Civil Engineering
    Mechanical, Electrical & Plumbing Systems
    Commercial Design
    Residential Design
    Structural Engineering
    2D Drawing
    Architectural Drawing
    Mechanical Engineering
    Architectural Design
    MEP Design
  • $50 hourly
    Greetings, I hold a Ph.D. and I am a seasoned patent analyst, 3D modeler, inventor and product designer in New York. I have provided technical writing and illustrations for over 100 patents for 'pro se' inventors who represent themselves to the patent office. I hold a paralegal certificate and I often work under the supervision of attorneys, collaborate with engineers and innovators. I can go from design work to reverse engineering (using scanners), to prototype printing (8k resolution, resin and filament 3D printers), to fabrication drawings. I have also drafted user manuals and technical documentation and perform artificial intelligence prompt engineering. I am also a scientific author and illustrator specializing in technical writing, medical illustrations, statistics, grant writing, CAD drawings, proof-of-concept designs, as well as parametric mechanical designs. I utilize subscriptions for both AutoCADLT and Fusion360 routinely. I only accept a limited number of projects at a time so that I can maintain the quality and quick turnaround my clients have come to expect. Please know that I am NOT an attorney OR a registered patent agent, and I do NOT dispense legal advice or represent ANYONE to the USPTO - I only write technical content for those who chose to file themselves and my work is educational in nature. Thank you.
    Featured Skill Mechanical Design
    Workplace Safety & Health
    Patent Law
    Prototyping
    Medical Device User Manual
    3D Modeling
    Legal Agreement
    Drafting
    Prototype Model
    Environmental Engineering
    Patent Search
    Figma
    User Manual
  • $100 hourly
    I have 15 years experience as a mechanical engineer and have had my Professional Engineers License for 6 years. I have worked on a various array of machines, mostly consisting of rotating equipment. I am familiar with Autodesk Inventor, Creo 7.0, 4.0, & Pro/E Wildfire, but have used Solidworks extensively. I am a Certified SOLIDWORKS Professional, with Certified Additive Manufacturing Associate (CSWA-AM), Certified SOLIDWORKS Professional Advanced Drawing Tools (CSWPA-DT), Certified SOLIDWORKS Professional Advanced Mold Tools (CSWPA-MT) , Certified SOLIDWORKS Professional Advanced Sheet Metal (CSWPA-SM), and Certified SOLIDWORKS Professional Advanced Weldments (CSWPA-WD) certificates.
    Featured Skill Mechanical Design
    Manufacturing
    Manufacturing Engineering
    Drafting
    Engineering Design
    Design Thinking
    3D Printing
    Autodesk Inventor
    SolidWorks
    3D Design
    Mechanical Engineering
    3D Modeling
    Finite Element Analysis
    Design for Manufacturing
  • $75 hourly
    EX VICTORIA'S SECRET, COLGATE PALMOLIVE, STILA COSMETICS, REVLON, ANHEUSER-BUSCH, COCA-COLA, TED BAKER, KENNETH COLE Award winning Creative Director, Packaging & Print Design. Experienced with corporate identity, print collateral, promotions, and marketing, with a special emphasis on branding, concept development, and packaging. I take a creative and passionate approach to each project and can provide engaging, innovative design solutions. High attention to detail and excellence. My overall goal is to use my creativity, talent, and skills to create elegant, value added design for your project.
    Featured Skill Mechanical Design
    Food & Supplements
    Food & Beverage
    Fashion & Beauty
    Beauty & Personal Care
    Construction Document Preparation
    Business Card Design
    Brochure Design
    Logo Design
    Graphic Design
    Mood Board
    Art Direction
    Production Design
    Tech Pack
  • $65 hourly
    I am a hard-working mechanical engineer experienced in equipment installation, machine & product design, as well as research and development. Most of my experience was spent in designing & creating equipment installation shop drawings for new construction. I received a Bachelor's degree in Mechanical Engineering from Northeastern University in 2020.
    Featured Skill Mechanical Design
    Structural Analysis
    Design Simulation
    Autodesk Inventor
    Special Purpose Machine Design
    Machine Design
    Mechanical Engineering
    2D Drafting
    Drafting
    3D Modeling
  • $40 hourly
    I'm a Mechatronics engineer working in Product development, passionate to offer unconventional solutions to conventional problems. Engineering is all about doing more with less, I take the same approach in every project to arrive at a solution. My multidisciplinary knowledge allows me to connect various fields in my problem solving approach. Product design & development - Consult me for any challenging problems in your product design or development at any stage. - Development of product requirements document (PRD) during initial stages of product development. - Releasing products into the market, designing brand identity, digital product marketing, website design etc. - Product market research and suggestions on ways to acquire feedback from your target audience. - Design for manufacturability analysis on a CAD designs. - Product certification to industry standards like UL, CE, CSA - I can help you through the process of certifying your product according to the standards. Mechatronics: - Integrating sensors to new or existing control systems, referring to detailed data sheets of sensors to develop code for the fitting into your systems -- worked with STM32F4 family. - Testing and debugging: Re-designing integrated sensors and control systems to withstand common errors encountered during operations. - Optimizing code to reduce errors and improve processing speeds - Pairing the right hardware to software.
    Featured Skill Mechanical Design
    International Development
    Arduino IDE
    Arduino Firmware
    Arduino
    Integrated Circuit
    Sensor Fusion
    Mechanical Engineering
    C
    STM32F4
    Autodesk Fusion 360
    CAD Drafting
    Product Development
    Product Design
  • $60 hourly
    New York, Mississippi Licensed Professional Engineer Team NY and MS Licensed Civil Engineer and Structural Engineer Team I am a Licensed Professional Engineer (PE) in New York, specializing in civil and structural engineering with a strong architectural background. I bring a multidisciplinary, permit-ready design approach to every project—ensuring full code compliance, safety, and constructability across all phases. With years of experience leading diverse teams and delivering structural solutions across New York, I’m equipped to handle both ground-up designs and complex retrofit projects with precision and speed. 🧰 Core Services & Specialties 🧱 Structural Engineering - Structural analysis & design (steel, concrete, wood, CMU) - Load calculation & seismic design (per ASCE 7, NYC Building Code) - Foundation & retaining wall design - Structural reports, site inspections & repair drawings - STAAD.Pro | Revit | AutoCAD | SAP2000 🏛️ Architectural Coordination - Structural-architectural integration - Full set construction & permit drawings (CDs) - Compliance with NYC DOB and zoning regulations - Revit 3D modeling for coordination & visualization 📝 Permit & Code Services - NYC DOB-ready structural drawing sets - Code analysis (IBC, NYC Code, ASCE, ACI, AISC) - Plan examiner coordination & redline response - Filing support & structural special inspections 🎯 Key Accomplishments: 1. Developed training programs for junior structural engineers. 2. Managed a multidisciplinary team of 10+ engineers and drafters. 3. Supervised the structural integrity assessment of aging infrastructure. Licensed Professional Engineer (PE) in New York, with extensive knowledge of both local and national building codes. 🚀 Let’s Build in New York—The Right Way Whether you’re developing a new building, retrofitting an existing structure, or navigating NYC’s complex approval process—I’m here to make it faster, smoother, and code-compliant. 📩 Let’s connect to discuss your structural needs today! registered structural engineer, licensed structural engineer, civil engineer, landscape designer, mep designer, hvac, architect, registered architect, licensed architect, landscape architect, registered mep engineer Keywords: certified, structural drawing, structural engineering, structural design, structural calculation, sturctural report, wooden structure, steel structure, garage, residential design, commercial design, registered structural engineer, licensed structural engineer, building information modeling, civil engineer, cad drafting, autodesk autocad, deck, garage, architectural design, floor plan, pdf to cad, landscape design, mep design, hvac, architect, registered architect, licensed architect.
    Featured Skill Mechanical Design
    Mechanical, Electrical & Plumbing Systems
    Autodesk Revit
    3D Drawing
    3D Rendering
    Floor Plan
    Floor Plan Design
    CAD Drafting
    CAD
    MEP Design
    AutoCAD HVAC Loads Calculations
    AutoCAD Civil 3D
    Civil Engineering
    Structural Engineering
    Structural Drawing
  • $250 hourly
    I’m a mechanical engineer who can help with anywhere along the full product development timeline. From blue sky to production. I specialize in robotic actuator design.
    Featured Skill Mechanical Design
    Mechanical Engineering
    CAD
    Engineering & Architecture
    Modeling
  • $34 hourly
    Hi, I'm Carlos Suero, an HVAC Drafter and Designer with over 10 years of experience in mechanical design, drafting, project coordination, and estimating. I’ve contributed to a wide range of residential, commercial, and high-profile projects for clients like Spotify, WeWork, and the Empire State Building. I’m fluent in both English and Spanish and skilled in tools like AutoCAD MEP, Revit, Navisworks, and Adobe Creative Suite. Born and raised in Queens, New York, I hold a Bachelor's in Architectural Technology from NYC College of Technology and thrive on turning complex designs into clear, build-able plans.
    Featured Skill Mechanical Design
    PlanSwift
    SketchUp
    Adobe Illustrator
    Adobe Photoshop
    Rhinoceros 3D
    Autodesk Revit
    Autodesk Navisworks
    Autodesk AutoCAD
    Drafting
    HVAC System Design
    3D Animation
    CAD Conversion
    Modeling
    CAD
  • $30 hourly
    Welcome to Zkono Solutions — where innovative engineering meets full-spectrum development. We are a multidisciplinary team with a core focus on mechanical design, 3D modeling, FEA, structural analysis, and product development, delivering solutions that are both technically sound and ready for manufacturing. From custom mechanical components to full engineering drawing packages, we use industry-standard tools like SolidWorks, Inventor, AutoCAD, and ANSYS to bring your concepts to life. In addition to mechanical engineering, we offer end-to-end software development services, including full-stack applications, front-end and back-end development, and scripting for engineering automation or standalone tools. Our software team is skilled in Python, Java, JavaScript, and frameworks for both web and desktop applications — making us a one-stop solution for clients looking to bridge the gap between hardware and software. Whether you're building a product from scratch or need technical expertise to level up your current project, Zkono Solutions is ready to help you bring it to life — with precision, speed, and innovation.
    Featured Skill Mechanical Design
    Product Development
    Autodesk Inventor
    Design for Manufacturing
    Finite Element Analysis
    Creo Parametric
    Back-End Development
    Front-End Development
    SolidWorks
    Structural Drawing
    Product Design
    CAD Drafting
    Java
    Database Development
  • $10 hourly
    Hello! I'm Ndifreke, an accomplished Industrial Designer with a passion for transforming ideas into products. With a keen eye for detail and a commitment to delivering innovative solutions, I bring a unique blend of creativity and functionality to every project. Why Choose Me to design your product? Creative Excellence: My designs go beyond aesthetics; they tell a story. I merge form and function to create products that not only look stunning but also enhance the user experience. Understanding your target audience is paramount. I delve deep into user behaviors, needs, and preferences to ensure that the final product resonates with its intended audience. Your vision is the driving force behind every project. I believe in a collaborative approach, working closely with clients to translate their ideas into tangible, market-ready products. Your input is not just valued; it's crucial to the success of the project. From concept sketching to 3D modeling, I leverage the latest design tools and technologies to bring your ideas to life. My technical proficiency ensures that the design is not just visually appealing but also manufacturable and cost-effective. What you’ll get: Product Design: Conceptualizing and developing product ideas from initial sketches to detailed 3D models. Prototyping: Creating functional prototypes to test and validate designs before moving to production. CAD Modeling: Utilizing advanced CAD software to ensure precision and accuracy in every design. Material and Manufacturing Expertise: Recommending the most suitable materials and manufacturing processes for efficient and cost-effective production. Design Optimization: Enhancing existing designs for improved functionality, aesthetics, and user experience. Whether you're a startup looking to make your mark or an established company seeking a design refresh, I'm here to bring your vision to life. Let's embark on a journey of innovation together, creating products that not only meet but exceed expectations. Feel free to reach out to discuss your project, ideas, or any questions you might have. I'm excited to be a part of your design journey! Industrial Designer - Industrial Design - Product Design - Product Designer - 3d design - 3d modeling - Sketching, Sketch, Sketches, Design, Rendering, Render - 3d sculpting - Designs - Product- Manufacturing file.
    Featured Skill Mechanical Design
    Material Design
    Rapid Prototyping
    CAD
    Injection Mold Design
    Injection Mold
    User Interface Design
    Wireframing
    Responsive Design
    Mobile App Design
    User Experience
    UX & UI
    Webflow
    Product Development
    Product Design
  • $74 hourly
    Expedience, professional mechanical and architectural designer and construction coordinator specializing in Revit.
    Featured Skill Mechanical Design
    BIM Clash Detection
    CAD
    BIM Implementation Plan
    BIM Family Creation
    BIM Family
    BIM Coordination
    Autodesk Revit
    Autodesk Navisworks
    Architectural Design
    Modeling
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by 5M+ businesses