Civil Engineering Jobs

58 were found based on your criteria {{|number:0 }} were found based on your criteria

show all
  • Hourly ({{ jobTypeController.getFacetCount("0")|number:0}})
  • Fixed Price ({{ jobTypeController.getFacetCount("1")|number:0}})
Fixed-Price - Expert ($$$) - Est. Budget: $800 - Posted
The design package is for the detail design and compilation of engineering drawings on a light crude oil tank foundation, as per the attached documentation. Summary 1. The applicable standards are listed in the table below. The foundation must be designed to these codes. BS-8110-1-1997 1997 British Standards - Structural Use of Concrete (All concrete and reinforcement to be designed in accordance with this code.) Uniform Building Code (UBC) 1997 1997 Building Code for Calculating Seismic Loads (Seismic, live and operational load to be determined from this code. All load combinations to be determined from this code) Ghana Building Code 1988 Building Code for Calculating Wind Loads (Wind loading to be calculated according to this code. Copy of the code can be provided if required) Vendor drawings As supplied with this package Drawing 2. The requirements for the calculation sheets are important, and all requirements must be adhered to, as outlined in the attached document. 3. Engineering requirement as per the attached document must be addressed. 4. In order to be shortlisted, please answer the following questions and submit with your proposal: 4.1 In your experience, what do you expect the determining force on the tank foundation to be? 4.2 From the tank data sheet attached, guess the required foundation geometry. Don’t take longer than 60 seconds to think about it. 4.3 How would you handle the axial (vertical) force component on the tank foundation? Explain in one sentence. 4.4 What scenario / force would expect to determine the horizontal circumferential reinforcing in the tank foundation wall? 5. The freelancer must give a cost breakdown for the project as follows: • Detail design calculations, cost and schedule • Detail engineering drawings, cost and schedule 6. The design must be a fit for purpose, optimized design.
Skills: Civil Engineering AutoCAD English Microsoft Office
Hourly - Intermediate ($$) - Est. Time: Less than 1 week, 10-30 hrs/week - Posted
I need a structural engineer to design a wood loft structure that meets basic engineering requirements for construction. The project is as follows. I am building a wooden loft inside of a garage that is approximately 40' x 15.5' (600sf). The walls of the garage are non-load-bearing, so a loft structure needs to be built inside of the non-load-bearing walls. The height of the garage is approximately 19', which allows for a loft to be built at an approximate height of 9' off the ground. The 2nd floor (loft) will provide living quarters. I would assume that we will use post-and-beam construction and use wooden I-joists. I need a structural engineer to lay out the approximate materials and construction details from a basic floorplan that I will provide. I expect the details to be enough for a framing contractor to work from. Thank you, please let me know if you have any questions.
Skills: Civil Engineering Architecture Structural Analysis Structural Engineering
Fixed-Price - Entry Level ($) - Est. Budget: $101 - Posted
Need a Civil Engineer with experience in Hydraulic engineering to prepare a Flood Management Plan (FMP). NER Registered will be best & get preference. Plan need to address emergency flood management of the site including the use as appropriate of warning signs, notices of procedures, depth gauges (if required) and whether evacuation is required and if so what route.
Skills: Civil Engineering
Hourly - Entry Level ($) - Est. Time: More than 6 months, Less than 10 hrs/week - Posted
Looking for someone who has experience with earthwork quantity takeoffs, utility takeoffs and footing/foundation estimating. I am currently using Trimble Business Center Heavy Construction Edition for my earthwork takeoffs but also have access to Autocad Civil 3D. For more simplistic takeoff measurements like utility lengths I will use Bluebeam.
Skills: Civil Engineering Autodesk Autocad Civil3D Building Estimation Drafting
Fixed-Price - Intermediate ($$) - Est. Budget: $400 - Posted
We need a structural engineer to do basic structural calculations/simulations in 3D for 2 story single home (steel frame and foundation). We already have the structure designed in 3D in ArchiCAD (see the full structure design in this link: We need a person able to edit, modify, improve and make a structural report of our project using a user friendly 3D software. We are very open to suggestions about what software to use. Once the report is completed, the project has to be delivered in his native file in order to be editable in 3D. The project is very simple, built with: PRIMARY FRAME: 4x4 11 gauge hot rolled tubular steel + some trusses or I beams. SECONDARY FRAME: 2x4 14 gauge hot rolled tubular steel. ERECTION METHOD: welding FLOORS AND ROOF: uses type B metal deck panels with a 1.5 inch cement coat SHELL: built with 1 inch rib metal lath (herringbone mesh pattern) and structural stucco FOUNDATION: to be designed using basic and simple monolithic slab on grad. Land is flat and surface is very stable. Topographic Survey and Soil Test available. ANCHORING: Main columns have to be anchored to the slab with screws and anchor plates. Actual project was modeled in 3D using ArchiCAD, so it is recommended you be able to import the 3D model from (.pln) file with your software. We need the usual structural report, with emphasis in wind tests, since the area is subject to Category 5 Hurricane forces. Report has to include material quantity. We use this website as reference for materials: Parameters - We need to talk on Skype BEFORE you start the job to give you some parameters which you are going to use on this project. Work will be divided in milestones. Skype meetings with screen sharing will be necessary to present and discuss the job in every milestone completed. Collaborative Skype sessions to work together on the model are a must in order to modify/tune up/simplify/improve it, adding or eliminating columns, beams, studs that are not necessary, with the scope of reducing unnecessary material to optimize costs. We require to keep work as simple, economic and pragmatic as possible. Location of the project is Fort Lauderdale, FL USA and it has to comply with South Florida Building Code. We need a person with basic conversational English who is open, friendly and willing to cooperate, including Skype videoconference and sharing screens. Please show us some job examples, portfolios or screen captures in order to be considered to this job. Thank you!
Skills: Civil Engineering ArchiCAD Architecture Engineering Design
Hourly - Intermediate ($$) - Est. Time: Less than 1 month, 10-30 hrs/week - Posted
I am looking for an engineer with experiences in designing wood structural buildings in California. You will provide structural drawings and calculations for a 2 story house in California. The designer will work under our Professional Engineer guidance who will review, approve and stamp the drawings.
Skills: Civil Engineering AutoCAD Structural Analysis Structural Engineering
Hourly - Intermediate ($$) - Est. Time: Less than 1 week, 10-30 hrs/week - Posted
• Critically analyse current ideas about transport and land use planning • Identify procedures that have been developed for planning transport and land use • Compare and contrast the major international trends and debates in the area • Recognise the key issues associated with transport and land use planning • Contextualise the history and practice of transport and land use planning in Melbourne and in an international context
Skills: Civil Engineering Architecture Urban Design