Upwork home
Sign up
Secondary

Hire the best Process Engineers

Check out Process Engineers with the skills you need for your next job.
Hire freelancers
Clients rate Process Engineers
Rating is 4.7 out of 5.
4.7/5
based on 193 client reviews
  • US$200 hourly

    • 4.8/5
    • (61 jobs)
    * Supervising Engineer * Plan Review / PE Stamping * Project Management * Building / Mechanical Code Compliance * Drawing / Specification Package Preparation * BIM/VDC * Certified Commissioning Authority (CxA) Professional Engineer licensed in the following states: CA - California FL - Florida NM - New Mexico NY - New York OH - Ohio TX - Texas Extensive experience designing HVAC, mechanical, refrigeration, plumbing, and high-performing advanced control systems in various building types and sizes across residential, healthcare, commercial, industrial, manufacturing, aviation, higher education, and combined heat and power markets. I have an extensive understanding of the International Building, Mechanical, Plumbing, Fuel Gas, Fire, and Residential Codes, as well as NFPA, ASHRAE, ASME, ANSI, and ASSE standards. All designs are performed in 3D with Autodesk Revit, or other CAD / BIM programs per request. Mechanical Systems of Note: -Hot Water Boiler -Low and High Pressure Steam -Chilled Water -Process Cooling -Combined Heat and Power Plants (CHP) / Cogeneration / Trigeneration -Central Refrigeration Systems (Ammonia / CO2 Cascade, Transcritical CO2) -Geothermal -Heat Pumps (ground, water, air source) -VAV Variable Air Volume, Low / Medium / High Pressure duct systems -VRF / Energy Recovery Ventilation -Industrial HVAC / Hazardous Exhaust Systems -Heat Recovery Finite Element Analysis: Advanced piping design. FEA pipe stress test analysis for thermal stresses on power piping, high-pressure steam, low temp refrigeration, process piping, and other pipe systems. Expertise with the following ASME piping codes: -B31.1 Power Piping -B31.3 Process Piping -B31.5 Refrigeration Piping and Heat Transfer Components -B31.9 Building Services Piping -BPE Bioprocessing Equipment (Pharmaceutical Process Piping) Computational Fluid Dynamics: CFD for advanced HVAC and thermal/fluid designs. Simulations of smoke control systems, data center cooling design, large open atrium, industrial HVAC and process piping, etc. Preconstruction Coordination / BIM / VDC: I model 2D plans in 3D and perform clash detection to ensure interdisciplinary coordination before construction. In addition, I have a 3D laser scanner which I use to generate extremely accurate 3D point clouds for use in Revit, Navisworks, and AutoCAD to generate precise as-builts. Energy Engineering: I have extensive experience analyzing and simulating existing and new energy systems to identify energy conservation measures. These systems include boilers, chillers, compressors, air systems, thermal oxidizers, industrial processes and heat recovery opportunities. I am able to leverage powerful tools built into Excel such as Power Query, as well as programmable Open Modelica simulations of energy systems. In addition, I provide life-cycle, NPV, IRR calculations to establish project feasibility. Software Capabilities: Autodesk Revit Autodesk Plant3D Autodesk AutoCAD Autodesk Navisworks Manage / Simulate Autodesk ReCap Pro Autodesk Inventor Pro Nastran In-CAD FEA Matlab Open Modelica Python Simulink Simscape Danfoss Coolselector2 Carrier HAP Hourly Analysis Program MS Office / Excel / Power BI
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    MEP Design
    Energy Simulation
    Energy Engineering
    Mechanical Design
    Energy Management
    HVAC System Design
    Building Design
    Building Information Modeling
    Plant Design
    Plumbing
    Mechanical Engineering
    Computational Fluid Dynamics
    3D Design
  • US$85 hourly

    • 5.0/5
    • (99 jobs)
    I have extensive experience in working with integrating systems using API and Zapier/Make to streamline and automate processes. With an ability to easily comprehend API documentation, I can bring a project together from scope analysis to execution. To create seamless processes reducing manual work and delays. Using Zapier, I create simple zaps or a combination of complex zaps with API Code steps to create workflows. I work with "Webhooks by Zapier" and "Code by Zapier" to develop custom integrations with Zapier. Also used advanced technical features of Integromat like Array Integrators, Iterators, API requests, and Integromat functions. Very familiar with webhooks to fetch real-time data. I can code in Google Apps script or pick up any language required for the project quickly. A few of the systems I have worked with are as below - Forms: Process Street, Typeform, Jotform, Paperform, Google Forms - CRM: Trello, Monday.com, ClickUp, Salesforce, PipeDrive - Gsuite: Drive, Sheets, Gmail, Docs - Scheduling: Acuity, Calendly. OnceHub - Payments: Xero, Stripe - Marketing: Mailchimp, Active Campaign - Invoicing: QuickBooks - Online Proofing: Ziflow - Communication: Zoom I have ten years of experience in building scalable applications using Java, PHP, and Python. A lot of focus being on developing applications and API integrations(using OAuth, REST, webhooks, GraphQL). I am interested in working on anything involving integrating and automating systems using API. Looking to work in a long term partnership.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Survey Data Analysis
    Typeform
    Google Docs
    Automation
    Make.com
    Scripting
    Business Process Automation
    Google Sheets
    Data Visualization
    API Integration
    Zapier
    Google Apps Script
    API
    Python
    Project Workflows
  • US$45 hourly

    • 5.0/5
    • (85 jobs)
    - Experienced Draftsman with over 30 years experience with AutoCad and 2 years with Revit. - Licensed Mechanical Engineer in Arkansas, Oklahoma, Texas, Missouri, Mississippi, Virginia and Pennsylvania - Experienced Mechanical Engineer with experience in plumbing and HVAC design in commercial, residential and industrial industries. - Experienced Process Engineer with experience in the food processing industry including poultry and meat processing, dry pet food processing and packaging, confectionary (chocolate) processing and frozen treat processing. Currently using AutoCad version 2019 as my 2D platform and Revit version 2019 as my 3D platform. I can: -Provide process flow diagrams -Provide process layout drawings -Take your hand sketches and turn them in to CAD drawings -Convert .pdf files to .dwg files. -Make shop drawings For a more detailed listing of my work history, please refer to my work history.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Construction
    Software Maintenance
    HVAC System Design
    Drafting
    Mechanical Engineering
    Process Design
    Manufacturing & Construction
    Autodesk AutoCAD
    Autodesk Revit
  • US$80 hourly

    • 4.8/5
    • (239 jobs)
    I'm 15 years experience teaching Chemical Engineering. My specialty is chemical engineering problem solving in Fluid Mechanics, Material and Energy Balances, Thermodynamics, Heat Transfer, Separation Processes, and Chemical Reactors, with computational tools like Maple, Mathcad, and Matlab; and simulation using Aspen Plus, Aspen Hysys, and Pro/II. My mother language is Spanish, so I can help you if you need information in my field in that language. My Area of interest is Researching, I consider that advance of science and engineering depends strongly on Researching. Well, I hope that my knowledge and experience can help you with your projects.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Energy Engineering
    Petroleum Engineering
    Aspen HYSYS
    MATLAB
    Process Simulation
    Maple
    Spanish English Accent
    Mathematics Tutoring
    Teaching Algebra
    English to Spanish Translation
    Equipment Sizing
    Chemical Engineering
    MathCad
  • US$10 hourly

    • 4.7/5
    • (33 jobs)
    👋 Hello! I am a highly skilled Chemical Engineer with over 10 years of experience specializing in water treatment and Safety Data Sheet (SDS) management. My expertise lies in designing and optimizing water treatment processes, ensuring compliance with environmental regulations, and creating comprehensive SDS documentation. I am passionate about delivering sustainable solutions that promote safety, efficiency, and environmental stewardship. 🌊 Key Skills: 1. Water Treatment Engineering: Expertise in designing and optimizing water treatment systems, including filtration, disinfection, desalination, and wastewater treatment. 2. Safety Data Sheets (SDS): Proficient in authoring, reviewing, and managing SDS documents to ensure compliance with OSHA, REACH, GHS, and other global standards. 3. Regulatory Compliance: In-depth knowledge of environmental regulations and standards, including EPA, WHO, and ISO guidelines. 4. Process Optimization: Skilled in process simulation, troubleshooting, and optimization to enhance system performance and reduce operational costs. 5. Project Management: Experienced in leading and managing projects from conception through implementation, ensuring timely delivery and budget adherence. 6. Laboratory Analysis: Proficient in conducting water quality analysis, chemical testing, and data interpretation to support treatment process design and optimization. 7. Technical Documentation: Adept at creating detailed technical reports, operating procedures, and training manuals. 🔬Why Choose Me: ✅ Proven Track Record: I have completed many projects, earning credits for my attention to detail and commitment to excellence. ✅ Expertise: With a solid foundation in chemical engineering and specialized knowledge in water treatment and SDS, I bring a unique skill set to your project. ✅ Commitment to Quality: I am dedicated to delivering high-quality, reliable, and sustainable solutions that meet your specific needs. ✅ Client-focused: I prioritize clear communication, timely delivery, and client satisfaction in all my projects. ✅ Problem Solver: I excel at identifying issues and developing practical solutions that enhance safety, efficiency, and compliance. 💧Let's work together to achieve your water treatment and chemical safety goals. Feel free to reach out to discuss your project needs and how I can help. Contact Me Today!
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    English
    Content Writing
    Editing & Proofreading
    Article
    Blog Content
    Video Design
    Article Writing
    Cost Estimate
    Graphic Design
    Chemical Engineering
    Social Media Marketing
    Project Management
    Chemistry
    Wastewater Management
  • US$150 hourly

    • 4.3/5
    • (18 jobs)
    A detail oriented and science minded chemical engineer by trade, I excel at process optimization, thinking outside of the box and coming up with creative ways to solve problems, save energy and increase cash flow. I have experience in mineral & metal processing & refining, bio-refining and bio-products, corrosion analysis, water treatment and waste water handling. I have an extensive analysis skill set that includes concrete statistical knowledge as well as formal education on experimental design & stimulus/response screening & optimization. I have an entrepreneurial background, and perform well in small, highly robust teams as well as individually or part of a larger group. Perhaps most importantly however, I have proven experience transforming these skills into dollars - as shown by my project portfolio, containing new product lines, reduced operating expenses, extensive research results and extensive hard payback dollars generated.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Process Design
    Process Optimization
    Process Safety
    HAZOP
    Energy Engineering
    Risk Assessment
    Biology
    Chemical Engineering
    Economic Analysis
    Sustainable Energy
    Root Cause Analysis
    Data Analysis
    Chemical Analysis
    Chemistry
  • US$95 hourly

    • 5.0/5
    • (23 jobs)
    Range of activities performed: - CALCULATIONS: mass, heat balances, heat transfer, hydraulics, mass transfer, numerical methods (eg MATLAB), thermodynamic, chemical kinetics - DESIGN: equipment sizing, process design, chemical engineering systems design, thermal design, mechanical design of heat exchangers, MOC (Materials of construction) selection - ECONOMICS & OPTIMIZATION: feasibility studies, economics ratios analysis, profitability analysis, topological optimization, parametric optimization - PROJECT MANAGEMENT: all FEL phases, all FEED phases, project schedule management - SAFETY & RISK: HAZOP analysis, HAZAN analysis, health risk assessment, process safety consulting - R&D: data research (mining), collaborative working, laboratory data analysis, steady state simulations, research on the possibility of new processes Helping with connect economy of resources and investments with environment and public safety. 6+ years in chemical industry directly at the plant.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Physics
    Topology Optimization
    Chemical Engineering
    Economics
    Project Engineering
    Project Management
    Chemistry
    HAZOP
    MATLAB
  • US$17 hourly

    • 4.9/5
    • (185 jobs)
    -Mechanical Engineer and Master Plumber - has dedication, loyalty and time management -Highly experienced in Autocad software for any drafting works -has extensive knowledge in creating HVAC, Plumbing/Hydraulic and fire protection specifications, schematics, drawings and installation diagram - can do engineering design, cost engineer
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    MEP Design
    Mechanical Design
    Fire Protection Engineering
    Material Take-Off
    Construction
    Hydraulic Engineering
    Construction Estimating
    Estimator
    Quantity Surveying
    Mechanical Engineering
    Plumbing
    2D Design & Drawings
    AutoCAD HVAC Loads Calculations
    HVAC System Design
    Autodesk AutoCAD
  • US$40 hourly

    • 5.0/5
    • (14 jobs)
    With more 10 years of work experience as a Piping Mechanical Engineer, I have been involved in the engineering execution of various projects in the design of Oil and Gas, Chemical, Petrochemical and Manufacturing Plants. Projects ranges from local and international, green and brown field, FEED, proposal, and EPC projects. Involvement in various projects developed my knowledge with the international codes and standards involving piping design. I’ve been handling fellow piping engineers in executing project through leading and supervising their piping design activities. Executes 2D and 3D modelling during the early stage of my career. Mainly responsible for the preparation of piping layout around pumps, vessels and drums, heat exchangers, filters, compressors, tanks, columns and towers, reactors, air fin coolers and cooling towers and ensures that design complies with the P&ID process requirements, project standards and with international codes and standards. Have been assigned as a piping engineer in Japan. Also assumed the role of a piping field engineer and piping field supervisor in some local projects. I've done 2D drafting for various discipline to assist in their activities (Process P&ID, Civil UG and structural details, Mechanical Drawings, Electrical and Instrument Cable Routing, etc.) Also, I have been tasked to train fellow colleagues in the operation of AutoCAD Plant 3D. • Good knowledge in using computer aided drafting tools: AutoDesk AutoCAD Bentley MicroStation • Experienced in using 3D drafting software: AutoDesk AutoCAD Plant 3D Aveva Plant Design Management Systems (PDMS) Aveva Everything 3D (E3D) Intergraph Smart Plant 3D Intergraph Plant Design System (PDS) • Trainor of AutoCAD Plant 3D in our company • Adept in using Microsoft programs • Excellent knowledge in the principles, theories codes and standards of Piping Design • Responsible, hardworking, and willing to work on flexible schedule • Good communication skills with pleasing personality • Quick to learn and open minded
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    3D Drawing
    Plant Layout Design
    Mechanical Design
    Drafting
    Piping Design
    Piping & Instrumentation Diagram
    AutoCAD Plant 3D
    Microsoft Excel
    ASME B31.3
    Engineering Design
    CAD
    CAD Drafting
    Autodesk AutoCAD
  • US$10 hourly

    • 4.8/5
    • (10 jobs)
    I have completed the Degree of Mechanical Engineering in 2010 and have more then ten (10) years of experience in oil & Gas Sector. I have successfully completed various projects of Industries/building as a free lancer and have expertise in the below mentioned software. - Piping Stress Analysis (Piping flexibility Analysis) using CAESAR Software of following piping codes (B-31.3, B31.8 & B31.4) - Advanced Structural Analysis of any steel structure using Staad Pro V8i - Dynamic Analysis of steel structure using Abaqus - Tank designing using AMETank - Pressure Vessel & Heat Exchanger designing using Compress Software It's important to me to build long term relationships with clients, so I'm primarily looking for long term projects. I'm flexible with my working hours and am happy to work closely with any existing freelancers you work with. I look forward to hearing from you! less
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Estimator
    Process Design
    Steel Detail Drawing
    Caesar II
    PV ELITE
    Piping Design
    Engineering Design
    Structural Analysis
    Plant Layout Design
    Mechanical Design
    Abaqus
    STAAD
    Mechanical Engineering
    Autodesk AutoCAD
    ANSYS
  • US$80 hourly

    • 3.9/5
    • (10 jobs)
    I am a licensed professional (PE) chemical engineer who experienced Chemicals, Oil & gas, Renewables projects. My Top Rated Plus represent the top 3% of performers on Upwork with proven success on large or long-term contracts. I worked as a process engineer and plant designer from R&D phase to feasibility study, basic design, detail engineering to construction in USA and overseas. I Managed data, time, cost, quality, resource and contractor. Worked with vendors, suppliers and contractors closely.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Management Consulting
    IT Consultation
    Chemical Engineering
    Piping Design
    Piping & Instrumentation Diagram
    Energy Engineering
    Budget Management
    AVEVA PDMS
    Aspen HYSYS
    Project Timelines
    Research & Development
  • US$30 hourly

    • 5.0/5
    • (8 jobs)
    I have completed my chemical engineering in 2020. Currently, I am studying Process engineering and working on the Project of Pervaporation for the separation of ethyl alcohol from water by using mixed matrix membranes. I also have expertise regarding Aspen plus, aspen hyses, polymath, Microsoft Visio, MATLAB, Simulink, ANSYS fluent for CFD calculations and Microsoft Excel in terms of engineering point of view. I take a deep interest in research-based projects related to my chemical engineering because my final year project during chemical engineering was a research project. I have worked on an Interpretive analysis of Coal which have been published in the Pak Lab Journal in November 2017. I have successfully completed my Research paper with my team as a final year project with the title of 'Electrochemical Treatment of water' which has been published in IEEE journal 2021. Now I have decided to use my expertise like different software used in chemical engineering to work as a freelancer on Upwork. I am highly willing to offer my professional services to international clients related to my chemical engineering field like simulation, modelling on aspen, literature review for different research-based projects etc.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    AutoCAD Plant 3D
    Aspen Plus
    Article Writing
    Mechanical Engineering
    Numerical Analysis
    Chemical Engineering
    Simulink
    Process Modeling
    SolidWorks
    MATLAB
    Process Flow Diagram
    Aspen HYSYS
    ANSYS
    CFD Analysis
  • US$20 hourly

    • 4.8/5
    • (6 jobs)
    I am professional chemical engineer having a lot of research and industrial experience. I am simulation expert. I mostly use Aspen and matoab softwares. My interests are designing, research and writing, problem solving and innovation in chemical engineering and related fields. I have completed many industrial and lab scale researches and designing projects. I am helping many firms in designing new products and process development. My problem solving and solution making skills are extraordinary. I have good command on followings: 1. Coal engineering and coal energy 2. Water treatment 3. Cosmetic 4. Polymer and plastic 5. Simulation Design and development of new products 6. Waste management and safety 7. Transport phenomena 8. Separation 9. Reaction kinetics 10. Chemical process industry 11. Energy and mass balance 12. Thermodynamics 13. Advance instrumentation Following are the skills i have: 1. Simulation and designing(Aspen hysys, Matlab, Microsoft office, , visual basic, Chem CAD) 2. Problem solving 3. Report writing and research 4. Energy audit 5. Product develpment I will give work in time with best quality. Feel free to contact me anytime. I am always available for you. Thank you.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Technical Writing
    Plant Design
    Research Proposals
    Chemical Engineering
    Wastewater Management
    Chemistry
    Aspen HYSYS
    ChemCAD
    Process Simulation
    CFD Analysis
  • US$28 hourly

    • 5.0/5
    • (6 jobs)
    Hello, my name is Canberk Çelik, and I am an experienced mechanical design engineer with a strong background in both the automotive and aerospace defense sectors. With six years of professional experience, I have successfully completed several challenging projects, including the development of a fifth-generation fighter jet and a 155mm howitzer. My expertise extends to both design and production aspects, and I possess extensive knowledge in material science and R&D activities. I also have hands-on experience in concept development, prototyping, and production. Professional Background: During my career, I have spent three years working in the automotive industry, where I gained valuable insights into vehicle systems and design optimization techniques. I actively contributed to the development of cutting-edge technologies aimed at enhancing performance and efficiency. Additionally, I spent three years in the aerospace and defense sector, where I had the privilege of being part of a team responsible for designing a state-of-the-art fifth-generation fighter jet. This experience provided me with invaluable knowledge in aerodynamics, structural integrity, and advanced weaponry systems. Skills and Expertise: My diverse experience has equipped me with a wide range of skills and expertise in the field of mechanical design engineering. I am proficient in using computer-aided design (CAD) software, including CATIA V5, CATIA V6, and SolidWorks, to create detailed and precise 3D models. I am also capable of performing basic finite element analysis (FEA) to evaluate the structural performance of components and optimize their designs. Furthermore, I have hands-on experience in concept development, prototyping, and production processes, which allows me to bridge the gap between design and manufacturing seamlessly. Accomplishments: Throughout my career, I have successfully completed numerous projects that have demonstrated my capabilities in various areas. I have actively participated in research and development activities aimed at exploring innovative solutions for complex engineering challenges. Some of my notable achievements include: Fifth-Generation Fighter Jet: Played a key role in the design and development of a cutting-edge fifth-generation fighter aircraft, ensuring its aerodynamic efficiency, structural integrity, and weapon system integration. I was involved in the entire lifecycle of the project, from concept development and prototyping to production implementation. 155mm Howitzer Project: Led the design team responsible for a 155mm howitzer, focusing on optimizing its performance, reliability, and manufacturability. The project resulted in a highly efficient artillery system meeting stringent military requirements. I oversaw the prototyping and production phases to ensure seamless realization of the design. Weight Reduction and Cost Optimization: Developed and implemented strategies to reduce the weight of various mechanical components without compromising their strength and performance, leading to significant cost savings in manufacturing and operation. I worked closely with production teams to ensure the feasibility and efficiency of the proposed design changes. Conclusion: As an experienced mechanical design engineer, I possess a deep passion for pushing the boundaries of innovation and delivering high-quality solutions. With a solid background in both the automotive and aerospace defense sectors, I bring a unique perspective to every project I undertake. My expertise in material science, research and development, advanced design techniques, concept development, prototyping, and production enables me to contribute effectively to multidisciplinary teams and achieve outstanding results. I look forward to the opportunity to collaborate on exciting new projects and contribute my skills and knowledge to drive technological advancements in the mechanical engineering field.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Aerospace Engineering
    Mechanical Engineering
    Mechanical Design
    Design Concept
    Engineering Design
    Materials Knowledge
    Research & Development
    Static Testing
    ANSYS
    Test Results & Analysis
    Automotive
    Aerospace
    Autodesk AutoCAD
    CATIA
    SolidWorks
  • US$40 hourly

    • 5.0/5
    • (5 jobs)
    We are a team of motivated and creative goal-getters that will make your dream come true from scratch. We see ourselves as your 360° Software Development Partner, taking care of the digital skills needed to realize a software solution. We follow the philosophy that quality is more valuable than a rushed result. To develop meaningful and sustainable custom software, it is critical to take the time to document all processes, and think about best practices and a clean architecture so that the project does not only work for one version but is scalable and extendable for all future versions. Quality is a top priority for us, and each of our products goes through a solid quality foundation that secures the highest user experience, performance, and quality. In all respects, we achieve hassle-free deployment and continuous improvement of our digital products to make your dream come true! Our goals: 1. Being your 360° software development one-stop destination for all technical challenges 2. Improving/enriching ideas and concepts through our years of expertise 3. Creating software that works, is engaging and has a positive impact 4. Building partnerships with other goal-getters around the world to make the impossible possible Our working process in a nutshell: ❇ Free consultation and ideation ❇ Requirement and solution engineering ❇ UI/UX creation ❇ Software development ❇ Quality Assurance ❇ Deployment ❇ Long-term IT support If you believe that dreams should not be just dreams, but reality and you are looking for a team of experts to make those dreams come true, don't hesitate to contact us. We are ready to work with you as a 360° Software Development Partner to develop the next TikTok app.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Digital Signage
    Mobile UI Design
    Android App Development
    API Development
    Product Development
    Marketing Management
    Business Process Automation
    Web Development
    iOS Development
  • US$45 hourly

    • 5.0/5
    • (3 jobs)
    Expert in process engineering; utilizing Six Sigma/ LEAN methodologies for continuous process improvement, Process Definition/ Decomposition, Process Management, Process Implementation, IT & Business Process Only projects. Consulted for M&T Bank, Bank of America, Wells Fargo, Springleaf Financial Services/CitiBank OneMain, JP Morgan Chase, KeyBank, MindStorm Strategic Consulting and more... Typical projects completed - Business process automation, system integration, mergers/acquisitions, workflow implementation, risk assessment, business continuity, process analysis & optimization, centralization of risky business process, and more...
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Six Sigma
    Business Process Modeling
    Project Management Professional
    Microsoft PowerPoint
    Microsoft Azure SQL Database
    Business Process Reengineering
    Microsoft Visio
    Process Improvement
    Lean Consulting
    Microsoft Excel
  • US$95 hourly

    • 5.0/5
    • (47 jobs)
    I am a process analyst and project manager who specializes in navigating technical complexities and aligning them with strategic objectives as it relates to identifying and addressing process gaps and implementing documentation solutions. My expertise is in assisting organizations within both private and public sectors in the development, execution, and implementation of operational, user friendly, and educational documentation and training material, including implementing and building appropriate delivery and management systems and tools. My certifications include several FEMA ICS Emergency Management CEUs, and I am currently in pursuit of my PMP and PMO. Most recently, projects have included: • SharePoint Training System Build Out for Ottobock Global, one of the world’s largest prosthetic companies. • Assistance with QA for the Santa Cruz EOP Development. • Assistance with the 2022 & 2023 LA DSCA Series. • Development of Multiple Operational Manuals for Construction, Medical, Finance, and Non-Profit organizations. • Build out of NIST CSF Policy and Procedural Manuals within the Cybersecurity space. • Development of AI Application Manuals for integration into National Organizations. My passion is helping organizations bring their operations into current times, and to assist in ensuring that the right policies, procedures, tools, and documentation are in place for longevity.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Business Process Reengineering
    Business Process Modeling
    Procedure Development
    Process Development
    Process Improvement
    Technical Writing
    SEO Writing
    Writing
    Email Copywriting
    Procedure Manual
    Content Writing
    Copywriting
    Microsoft Excel
  • US$50 hourly

    • 4.8/5
    • (76 jobs)
    I am a Chemical Engineer with 15 years of experience as a Process Design Engineer at Oil & Gas Industry. I'm a Certified Energy Manager (CEM) from Association of Energy Engineers (AEE). I'm a Certified Process Safety Engineer and ISRS Assessor. I have extensive experience with: - Process simulation (Aspen Hysys ,Aspen Plus, Pro II) - Process Optimization - Process Flow Diagram(PFD) development - Heat and Material Balance development -Piping and Instrumentation Diagram (P&ID) development (AutoCAD, Microsoft VISIO) - Process Hazard Analysis (HAZID, HAZOP, SIL, LOPA, QRA, FERA, EERA, FMEA, FMECA, FTA, ETA) - Feasibility studies. - Process Data Sheets development (Equipment Sizing) - Cause & Effect diagrams development - Hydraulic Calculations (AFT Fathom, AFT Arrow) - Energy Efficiency Optimization I developed an accumulated experience as an instructor: - In-class and online training - Preparing course materials. - Preparing course outlines and exams I contributed in preparation, implementation and auditing of management standards for companies: - Quality Management System ISO 9001 - Environmental Management System ISO 14001 - Occupational Health and Safety Management System ISO ISO 45001 - Energy Management System ISO 50001 - Process Safety Management (PSM) OSHA 1910.119, PAS 55 and Seveso II
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Energy Engineering
    Process Modeling
    Process Optimization
    Process Flow Diagram
    HAZOP
    Aspen HYSYS
    Process Safety
    Piping & Instrumentation Diagram
    Process Simulation
    Process Design
    Feasibility Study
    Chemical Engineering
    Energy Optimization
    Autodesk AutoCAD
  • US$20 hourly

    • 4.7/5
    • (31 jobs)
    * Chemical Engineer with 15 years of experience in the process area.. Background in: Natural Gas plant projects and operations (NGL Extraction and Fractionation Plants, include Storage and Shipping). Technical and economic process evaluations. Pre-commissioning, commissioning and start-up of Natural Gas projects. * Computer Modeling and Simulation Skills in: Hysys, Pro II: Professional Process for Oil and Gas Plants Software Simulator. Pipephase , INPLANT: Hydraulic Oil and Gas network Software Simulator. Hextran Heat Exchangers Software Simulator, autoCAD Software * Developed Projects: 1.- NGL Extraction and Fractionation Trains, 2.- Product storage facilities, 3.- Utility Services, 4.-Gas pipelines (including valve stations and regulation systems), 5.- Natural gas conditioning systems (separation inlet facilities, dehydration, mercury removal), etc * Languages skills; Spanish (native language), English (Reading and Writing fluently, Speaking)
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Engineering Design
    Engineering Simulation
    Project Engineering
    Aspen HYSYS
    Hydraulic Simulation
    Plant Selection
    Reverse Engineering
  • US$20 hourly

    • 4.9/5
    • (34 jobs)
    I work on following deliverables. • Process Simulation on Aspen Hysys • Heat Exchanger Design Using Aspen Exchanger Design & Rating (Aspen EDR) • Process Hydraulics Calculations / Process Piping Steady Sate Simulation • Pipeline Sizing • Optimization of Piping System Losses (using AFT Fathom & Pipe Flow Expert Software) • Piping Line sizing • Pump Sizing & Selection • Optimization of losses in Piping System • Process Equipment Design • Material & Energy Balance Calculations (Comprehensive Calculations in MS Excel) • Training & Consultation in Chemical Engineering/ Process Engineering • Economic Evaluation & Analysis of Projects • Piping & Instrumentation Diagram (P&ID) • Process Flow Diagram (PFD) • Plant Safety Studies (HAZOP,HAZID) • Material of Construction (MOC) • Process Equipment Operating Procedure (For Training & Safe Operation) • Chemical Engineering R&D work (Renewable Energy) • Bill of Quantities (BOQ) of Plant • Expertise in Software like, Aspen Hysys, Aspen Plus, Aspen EDR, AFT Fathom, AFT Arrow, Pipe Flow Expert , PRIMAVERA P-6, MS Visio Professional, • Chemical Engineering Thesis / BS Project Review and Proof Reading • Hydroponics & Aeroponics, Fertigation Irrigation System Design • Sprinkle System Design Please feel free to discuss your Chemical Engineering's problems. Thanks & Regards
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Process Systems Engineering
    Piping Design
    Aspen Plus
    Process Simulation
    Chemical Engineering
    Reverse Engineering
    Chemical Synthesis
    Piping & Instrumentation Diagram
    Aspen HYSYS
    Petroleum Engineering
    HAZOP
    Flowsheet
    Process Flow Diagram
    Process Design
  • US$100 hourly

    • 4.9/5
    • (39 jobs)
    I have 10 years experience in fertilizer and Oil and Gas industry. I can provide with expert level services on Plant design, Process optimization and Aspen Simulations.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Plant Design
    Equipment Sizing
    Chemical Engineering
    Chemical Analysis
    Process Optimization
    Aspen Plus
    HTRI
    ISO 9001
    Process Simulation
    Piping & Instrumentation Diagram
    Aspen HYSYS
    Petroleum Engineering
    Process Integration
  • US$30 hourly

    • 4.3/5
    • (15 jobs)
    With a robust background in Chemical Engineering, I specialize in crafting solutions that elevate production standards and drive sustainable outcomes. My profile is defined by: • Engineering Excellence: proficient in applying advanced principles to optimize production processes and deliver tangible results. • Strategic Cost Management: recognized for implementing initiatives that yield significant cost savings and operational efficiencies. • Collaborative Leadership: I thrive in fostering teamwork to ensure seamless project execution and superior engineering outcomes. Committed to ongoing innovation, I continuously adapt to emerging technological trends, ensuring that my solutions remain at the forefront of industry advancements. If you seek a partner dedicated to transformative excellence and delivering measurable impact, I invite you to explore my portfolio and embark on a journey toward unparalleled success for your enterprise.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Autodesk AutoCAD
    Chemicals
    Chemical Engineering
    Aspen HYSYS
    Energy Engineering
    Microsoft Excel
    Equipment Sizing
    Process Flow Diagram
    Process Optimization
    Piping & Instrumentation Diagram
    Process Simulation
    Process Design
    Process Modeling
  • US$60 hourly

    • 4.5/5
    • (19 jobs)
    I am the founder and chief mechanical engineer of Covalo Industries (covalomotion.com). I have over 10 years of work experience from mechanical design, to machining and carbon fiber part fabrication. My professional experience has been spent working within the aerospace (Raytheon Technologies) and automotive industries (JTEKT/Koyo Bearing). I specialize in gear system design and machine system designing. I have the abilities to design and construct complex mechanical systems: -Perform FEA analysis -Shaft torsional and bending analysis to spec bearings -Motion simulations -Gear system design (multi stage gear sets, shaft design, housing design, flash temperature analysis and lubrication assessment). -Fatigues analysis -DWG creation (detail parts, mechanical installs and complex assemblies) -Sheet metal design/DWG creation -Vacuum forming design and DFM -Injection molding part design -Carbon fiber part design and mold design -Technical Writing I have other highly experienced design engineers who work with me as sub-contractors for large jobs of complexity, if your project requires it. I can support your project through every step of the process, beginning with design and prototyping to full production deliverables. I have both in-house 3D printing capabilities and CNC machining. I can also perform minor mechanical assemblies, and build functional prototypes. My top priority is offering great customer service, while delivering top quality.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Machine Design
    Process Improvement
    Carbon Fiber
    Lean Manufacturing
    Mechanical Engineering
    CAD
    3D Modeling
    Product Design
    Product Development
    Technical Writing
  • US$30 hourly

    • 4.9/5
    • (16 jobs)
    Hi, I'm Muhammad , a highly skilled chemical engineer with 10 years of experience in the oil and gas industry. I have a B.Sc. in Refining, Natural Gas, and Petrochemicals Engineering from Suez University and a master's degree in Chemical Engineering from Cairo University. My expertise lies in process optimization and flow assurance, as demonstrated by my successful project leading and technical study completion at Eni S.p.A.. Additionally, my hands-on experience with commissioning and startup processes, and hazard reporting has given me a well-rounded understanding of plant operations. I am well-versed in various software programs, including Aspen HYSYS, Aspen Flare System Analyzer, Aspen Energy Analyzer , Aspen Utility Planner , Aspen Capital Cost Estimator , OLGA Flow Assurance , AutoCAD P&ID, and Visio, and have earned certifications from reputable companies such as Schlumberger, TUV RHEINLAND, and Maersk. In addition to chemical engineering, I have a passion for projects in energy calculations and technical content writing. I am an excellent communicator in both Arabic and English and am always eager to take on new challenges. I am confident that my combination of technical skills, experience, and enthusiasm make me a valuable asset to any project. Let's work together and bring your ideas to life!
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Process Modeling
    Energy Engineering
    Process Safety
    Aspen HYSYS
    Aspen Plus
    Process Optimization
    OLGA
    Process Flow Diagram
    Procedure Manual
    Process Simulation
    COMSOL Multiphysics
    Microsoft Visio
    Chemical Engineering
    Microsoft Word
  • US$35 hourly

    • 5.0/5
    • (13 jobs)
    I'm an engineer born in 1974, who studied "Bachelor of Science in Mechanical Engineering" ( 3 years + Project end of degree), and extended the degree 2 extra years and a Project end of cycle, to obtain a "Master of Science in Industrial Engineering", both in Girona University. Award to best 2000 "Master of Science in Industrial Engineering" Project in whole Catalonia ( award from Catalonia engineers association) about designing a full suspensión bike using CAD, CAE analysis and Cynematics studies. In 1998 I started my career in a Chemical/paper plant where I'm currently Engineering and maintenance manager. It has been giving to me huge experience in all fields of general industry, process installations, instrumentation, fluids, machinery design, projects feasebility, negotiation, decision making, etc. Since 2005, my passion for MTB lead me to look for extra motivations as freelance for a MSC Bikes, designing mtb bikes, components, tires, etc. I've designed alu bikes, several carbon full suspension and hardtail bikes, including 27,5 plus, Fatbikes, 29 and 27.5 bikes. We finish our relationship in 2018 as they stopped producing bikes. I'm used to deal with foregin suppliers, european but even Taiwanese and Chinese ones. I use spanish perfectly, I speak and read/write english fluently in technical environments, and read French. Both jobs have complemented each other. I always find the right solution to every problem or Project at best Price and safely, without errors.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Machine Design
    Mechanical Design
    Industrial Design
    Product Design
    Engineering Design
    3D Printing
    SolidWorks
    Autodesk AutoCAD
    CAD
    Manufacturing & Construction
    2D Design
    3D Modeling
    3D Design
    Mechanical Engineering
  • US$35 hourly

    • 3.6/5
    • (171 jobs)
    🥇 Top 3% on Upwork (Top Rated Plus) 🥇 +1200 hours of tracked hours 🥇 100+ finished projects 🥇 10+ years of experience 🥇 End-to-end solutions for your projects A full time product designer and mechanical engineer with over a decade of comprehensive experience in various facets of engineering and design. I am passionate about leveraging my skills and experience to help you deliver innovative solutions that exceed expectations. Collaborating with clients to actualize their visions into tangible products is both my expertise and my passion. Throughout my career, I have honed my expertise in: * Product design * Product concept * 3D Modelling & Finite Element Analysis (FEA) * Computational Fluid Dynamics (CFD) * Mechanical engineering * Shape and Topology Optimisation * Parameters driven Optimisation * Design Validation * Stress-Life analysis * Thermal Analysis * Engineering drawing * Production driven design * Photorealistic rendering * Animated video rendering Software: * SolidWorks * AutoCAD * ANSYS * Keyshot With a commitment to excellence and a track record of success, I look forward to the opportunity to contribute to your projects and bring your ideas to life. Thank you for considering my profile, and I am eager to discuss how we can collaborate to achieve your goals.
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Hardware Prototyping
    Mechanical Design
    Augmented Reality
    Prototyping
    Concept Design
    Product Design
    Machine Design
    Prototype
    CAD Conversion
    Rapid Prototyping
    SolidWorks
    3D Modeling
    Mechanical Engineering
    Design for Manufacturing
    ANSYS
  • US$20 hourly

    • 5.0/5
    • (29 jobs)
    Greetings, My name is Adnan Akhtar. A proficient Chemical Engineering graduate with ample experience in process engineering with research expertise in wastewater treatment, statistical model development, and ANOVA Analysis. Moreover, I have attained proficiency in various Chemical Engineering software, including Aspen Plus, Minitab, Design Expert, and Matlab. I have two research publications in Clarivate Analytics International Journals and seven conference papers. Moreover, I have expertise in content writing and proofreading manuscripts in the English language, including academic writing and general article writing. Thanks
    vsuc_fltilesrefresh_TrophyIcon Process Engineering
    Python
    Piping & Instrumentation Diagram
    Engineering Simulation
    HAZOP
    Equipment Sizing
    Aspen HYSYS
    Process Simulation
    Chemical Engineering
    Process Modeling
    Process Design
    Microsoft Office
    Aspen Plus
    Data Scraping
    Proofreading
  • Want to browse more freelancers?
    Sign up

How it works

1. Post a job

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a Process Engineer on Upwork?

You can hire a Process Engineer on Upwork in four simple steps:

  • Create a job post tailored to your Process Engineer project scope. We’ll walk you through the process step by step.
  • Browse top Process Engineer talent on Upwork and invite them to your project.
  • Once the proposals start coming in, create a shortlist of top Process Engineer profiles and start to interview.
  • Hire the right Process Engineer for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a Process Engineer?

Rates charged by Process Engineers on Upwork can vary with a number of factors including experience, location and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a Process Engineer on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance Process Engineers and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Process Engineer team you need to succeed.

Can I hire a Process Engineer within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Process Engineer proposals within 24 hours of posting a job description.

Schedule a call

Looking to hire for long-term or full-time assignments? See how Full-time hiring on Upwork simplifies the process.