You will get ESP32 PCB design, schematic, PCB layout using Altium, KiCad or EasyEDA
Project details
I design professional ESP32 PCB boards, IoT hardware, schematic layouts, and manufacturing-ready PCB files for prototypes and production. Whether you need an ESP32, ESP32-S3, ESP32-C3, ESP8266, Arduino, STM32, sensor board, relay controller, battery-powered device, or wireless IoT product, I can help turn your idea into a clean and reliable PCB design.
What I can design:
✔ ESP32 PCB design for WiFi, BLE, IoT, and embedded systems
✔ Two-layer and multilayer PCB layout
✔ Battery-powered and low-power ESP32 hardware
✔ UART, SPI, I2C, RS485, CAN, LoRa, WiFi, and Bluetooth-based circuits
✔ EMI/EMC-aware layout, clean routing, and practical component placement
✔ DFM-ready files for JLCPCB, PCBWay, Seeed Studio, and other manufacturers
Tools I use:
✔ Altium Designer
✔ KiCad
✔ EasyEDA
Deliverables:
✔ PCB source files
✔ Gerber and NC drill files
✔ BOM with component details
✔ Pick and Place files
✔ 3D PCB preview/model
✔ Manufacturing-ready ZIP file
I look forward to discussing your ESP32 PCB design requirements.
Kind regards,
Aizaz
What I can design:
✔ ESP32 PCB design for WiFi, BLE, IoT, and embedded systems
✔ Two-layer and multilayer PCB layout
✔ Battery-powered and low-power ESP32 hardware
✔ UART, SPI, I2C, RS485, CAN, LoRa, WiFi, and Bluetooth-based circuits
✔ EMI/EMC-aware layout, clean routing, and practical component placement
✔ DFM-ready files for JLCPCB, PCBWay, Seeed Studio, and other manufacturers
Tools I use:
✔ Altium Designer
✔ KiCad
✔ EasyEDA
Deliverables:
✔ PCB source files
✔ Gerber and NC drill files
✔ BOM with component details
✔ Pick and Place files
✔ 3D PCB preview/model
✔ Manufacturing-ready ZIP file
I look forward to discussing your ESP32 PCB design requirements.
Kind regards,
Aizaz
Field of Expertise
Consumer Electronics, IoT, WearablesDesign Software
AutoCAD, Fusion 360, SolidWorks, OtherFile Format
JPG, PDF, STEP, OtherWhat's included
| Service Tiers |
Starter
$49
|
Standard
$99
|
Advanced
$199
|
|---|---|---|---|
| Delivery Time | 3 days | 5 days | 10 days |
Number of Revisions | 1 | 2 | 3 |
3D Modeling | - | ||
Texturing & Lighting | - | - | - |
Animation | - | - | - |
Source Files | |||
Background/Scene | - | - | - |
Enhanced Detailing | - | - |
Optional add-ons
You can add these on the next page.
Fast Delivery
+$25 - $55
Extra Components
(+ 1 Day)
+$20Frequently asked questions
7 reviews
(6)
(0)
(1)
(0)
(0)
This project doesn't have any reviews.
WK
Waghiz K.
Jul 15, 2026
Embedded Engineer for Flex-PCB & STM32 Firmware
Good communicator, knows his stuff. Would hire again
WK
Waghiz K.
Jul 15, 2026
4-6 Layer Mixed-Signal PCB
It was nice to work with you!
WK
Waghiz K.
Jul 1, 2026
ESP32 BLE Issue fix
Great work. Highly recommended
AR
Amjad R.
Jun 13, 2026
ISA Single-Cycle Processor Datapath Implementation
Great experience with Aizaz he went way ahead with the requests. Whenever I knocked him. He is awesome.
DM
Dias M.
Jun 9, 2026
Tiny PCB Design Expert
About Aizaz
Embedded Systems Engineer | PCB Design & Firmware Developer
86%
Job Success
Islamabad, Pakistan - 10:07 am local time
I support projects from system architecture and component selection through schematic design, PCB layout, firmware development, prototyping, testing, and manufacturing handoff.
➤ 𝗘𝗫𝗣𝗘𝗥𝗧𝗜𝗦𝗘
✔ Embedded systems architecture
✔ PCB design and electronic hardware development
✔ Embedded firmware in C and C++
✔ IoT and wireless device development
✔ Low-power and battery-powered systems
✔ Industrial controllers and sensor nodes
✔ Hardware debugging, testing, and optimisation
➤ 𝗣𝗖𝗕 & 𝗛𝗔𝗥𝗗𝗪𝗔𝗥𝗘 𝗗𝗘𝗦𝗜𝗚𝗡
✔ Schematic capture and circuit design
✔ Single-layer, double-layer, and multilayer PCB layout
✔ Analog, digital, mixed-signal, RF, and power electronics
✔ Component selection and BOM optimisation
✔ Signal integrity, grounding, thermal, and EMI/EMC considerations
✔ DFM, DFA, and DFT review
✔ Gerber, BOM, CPL, fabrication, and assembly files
➤ 𝗘𝗠𝗕𝗘𝗗𝗗𝗘𝗗 𝗙𝗜𝗥𝗠𝗪𝗔𝗥𝗘
✔ ESP32, STM32, Nordic nRF52 and nRF53
✔ Embedded C and C++
✔ FreeRTOS and Zephyr
✔ UART, SPI, I²C, CAN, RS-485, USB, and Modbus
✔ Sensor, display, motor, and communication integration
✔ Low-power modes, debugging, and hardware bring-up
✔ Real-time control and data-acquisition systems
➤ 𝗜𝗢𝗧 & 𝗪𝗜𝗥𝗘𝗟𝗘𝗦𝗦
✔ Bluetooth Low Energy and Wi-Fi
✔ LoRa and LoRaWAN
✔ LTE-M and cellular IoT
✔ MQTT, HTTP, and HTTPS
✔ Remote monitoring and wireless sensor systems
✔ IoT gateways and connected industrial devices
➤ 𝗧𝗢𝗢𝗟𝗦
✔ Altium Designer
✔ KiCad
✔ EasyEDA
✔ STM32CubeIDE
✔ ESP-IDF
✔ nRF Connect SDK
✔ PlatformIO
➤ 𝗜𝗡𝗗𝗨𝗦𝗧𝗥𝗬 / 𝗗𝗢𝗠𝗔𝗜𝗡
✔ IoT & Smart Devices
✔ Wearables Devices
✔ Industrial Automation
✔ RF & Wireless Systems
✔ Embedded Control Systems
✔ Sensor & Monitoring Systems
➤ 𝗪𝗛𝗔𝗧 𝗬𝗢𝗨 𝗥𝗘𝗖𝗘𝗜𝗩𝗘
✔ Complete hardware and firmware source files
✔ Organised schematics and PCB layouts
✔ Manufacturing-ready PCB documentation
✔ Clear technical documentation
✔ Prototype testing and debugging support
✔ Support from concept through production handoff
⭐ Share your requirements, block diagram, schematic, PCB files, firmware, or prototype details. I will review the project, identify the main technical risks, and recommend a practical development approach.
𝗞𝗲𝘆𝘄𝗼𝗿𝗱𝘀
Embedded Systems, PCB Design, Firmware Development, Embedded Firmware, Hardware Design, Circuit Design, ESP32, STM32, Nordic nRF52, Altium Designer, KiCad, EasyEDA, Embedded C, C++, FreeRTOS, Zephyr, IoT Hardware, BLE, Wi-Fi, LoRaWAN, LTE-M, MQTT, Power Electronics, Multilayer PCB, Signal Integrity, DFM, Industrial Automation, Sensor Systems, Hardware Prototyping
𝗛𝗮𝘀𝗵𝘁𝗮𝗴𝘀
#EmbeddedSystems #PCBDesign #FirmwareDevelopment #EmbeddedFirmware #HardwareDesign #ESP32 #STM32 #NordicnRF #AltiumDesigner #KiCad #IoTHardware #PowerElectronics #IndustrialAutomation #EmbeddedC #ProductDevelopment
Steps for completing your project
After purchasing the project, send requirements so Aizaz can start the project.
Delivery time starts when Aizaz receives requirements from you.
Aizaz works on your project following the steps below.
Revisions may occur after the delivery date.
Project Review
I will review your idea, schematic, component list, PCB size, layer requirements, and manufacturing needs before starting the design.
Schematic Design
I will create or review the circuit schematic and make sure the connections are clear and ready for ESP32 PCB layout.