You will get PCB Design services for Altium/Eagle CAD/Ki CAD
Top Rated
Top Rated
Project details
Hello,
I am Huzaifa Ali. I have about 8+ years of experience in the Embedded field. I have the skills to design and develop embedded software and debug or modify the software when needed. With expertise in hardware design and PCB design, I am proficient in using industry-standard software such as Altium Designer, Eagle, and KiCad. I have extensive experience in designing high-speed, complex PCBs with FPGAs, processors, DDR2, PCIe, HDMI, Ethernet, and USB 3.0. Additionally, I have designed layouts for 4G LTE, Wi-Fi modules, and Bluetooth antennas, and am skilled in differential signal and transmission line routing, impedance calculation, and stack-up building.
I specialize in RF PCBs using Rogers and FR-4 materials, with complete impedance calculation of transmission lines. I have also designed digital and analogue (mixed signal) PCBs, as well as multi-stack boards enclosed in casings and shields for Arduino and Raspberry Pi boards. I have worked on IOT PCBs with the connectivity of GSM/GPS, Bluetooth, Wi-Fi, ZigBee, and various sensors.
Please feel free to contact me before placing an order to discuss your specific project requirements.
Thank you.
I am Huzaifa Ali. I have about 8+ years of experience in the Embedded field. I have the skills to design and develop embedded software and debug or modify the software when needed. With expertise in hardware design and PCB design, I am proficient in using industry-standard software such as Altium Designer, Eagle, and KiCad. I have extensive experience in designing high-speed, complex PCBs with FPGAs, processors, DDR2, PCIe, HDMI, Ethernet, and USB 3.0. Additionally, I have designed layouts for 4G LTE, Wi-Fi modules, and Bluetooth antennas, and am skilled in differential signal and transmission line routing, impedance calculation, and stack-up building.
I specialize in RF PCBs using Rogers and FR-4 materials, with complete impedance calculation of transmission lines. I have also designed digital and analogue (mixed signal) PCBs, as well as multi-stack boards enclosed in casings and shields for Arduino and Raspberry Pi boards. I have worked on IOT PCBs with the connectivity of GSM/GPS, Bluetooth, Wi-Fi, ZigBee, and various sensors.
Please feel free to contact me before placing an order to discuss your specific project requirements.
Thank you.
Materials
OtherField of Expertise
Appliances, Consumer Electronics, IoTDesign Software
AutoCAD, Fusion 360, SolidWorksFile Format
DWG, JPG, OBJWhat's included
| Service Tiers |
Starter
$200
|
Standard
$400
|
Advanced
$650
|
|---|---|---|---|
| Delivery Time | 7 days | 15 days | 30 days |
Number of Revisions | 1 | 2 | 3 |
Number of 3D Renders | 4 | 4 | 4 |
3D Modeling | |||
Texturing & Lighting | |||
Animation | |||
Source Files |
195 reviews
(166)
(20)
(5)
(3)
(1)
This project doesn't have any reviews.
This freelancer doesn't have any reviews.
About Huzaifa
Embedded Hardware & Firmware Engineer | PCB | IoT | Embedded Linux
97%
Job Success
Karachi, Pakistan - 7:39 pm local time
I help startups, product teams, and manufacturers take an idea, prototype, or broken design and turn it into a working embedded product that can be tested, manufactured, and scaled.
My work connects hardware, firmware, and real-world product execution. Instead of treating the circuit, code, sensors, connectivity, power system, enclosure, and manufacturing process as separate pieces, I help bring them together into one reliable product.
WHAT I BUILD
• Custom schematic and PCB design for reliable embedded hardware
• Embedded firmware development in C/C++ for real-world products
• ESP32, STM32, Nordic, Arduino, Raspberry Pi, and Embedded Linux platforms
• BLE, Wi-Fi, LTE, Cat-M1, NB-IoT, LoRa, NFC, GPS/GNSS, and sensor integration
• Low-power electronics, battery-powered devices, BMS, and power management
• Industrial interfaces including UART, SPI, I2C, RS-485, CAN, Modbus, ADC/DAC, and GPIO
• Board bring-up, debugging, firmware validation, and hardware troubleshooting
• BOM preparation, Gerber files, assembly files, DFM review, and manufacturing support
I have worked across wireless IoT devices, wearable and medical electronics, industrial monitoring systems, automation hardware, smart sensors, connected consumer products, and custom embedded controllers.
WHY ONE TECHNICAL OWNER
Clients usually come to me when they need more than a schematic or a firmware file. They need someone who can understand the complete system, identify risks early, solve hardware and firmware integration issues, and move the product closer to production.
I also lead a full-service engineering team when projects require additional support across mechanical enclosure design, cloud integration, mobile app development, product design, or manufacturing coordination. This gives clients one technical owner while keeping the embedded hardware and firmware work technically grounded.
READY TO BUILD?
Send me your requirements, target platform, connectivity needs, power constraints, current design files, and production volume. I’ll respond with a clear technical scope within 24 hours.
Warm Regards,
Huzaifa Ali
Steps for completing your project
After purchasing the project, send requirements so Huzaifa can start the project.
Delivery time starts when Huzaifa receives requirements from you.
Huzaifa works on your project following the steps below.
Revisions may occur after the delivery date.
PCB design
The first step is to design the PCB using software such as Eagle, KiCad, or Altium Designer. This involves creating a schematic and laying out the board components in a way that is optimized for manufacturing and assembly.