You will get Electrical Layout, SLD, Schematics and BOM
Top Rated
Top Rated
Project details
I am a Senior Electrical Design Engineer currently working with a well-reputed EPC Contractor with over 13 years of experience in Basic and Detailed Engineering Projects. I have good enough experience in handling Power System analysis for Generation, Transmission, Distribution Utilities and bulk power-consuming industries.
Furthermore, I provide the services of Front End Engineering Design (FEED) and Detailed Engineering projects based on ITB project specifications. Datasheets and plot plan development and other Electrical Deliverables such as:
1- SLD and Key One Line Diagram
2-Load List
3-Cable sizing calculation, Cable Schedule, and Cable Tie-In Schedule.
4-Lightning and Grounding calculation and Layout
5-Lighting Calculation and Lighting Layout
6-Ground Grid Calculation and Layout
7-Cable Routing Layout and Installation details
8-Fire protection and fire fighting system
9-Data Sheets of electrical equipment
10-Quotation Review
11-RFQ
12-MTO (Material Take Off)
13-BOQ (Bill of Quantity)
14-Engineering Specifications
Regards
Abubakar
Furthermore, I provide the services of Front End Engineering Design (FEED) and Detailed Engineering projects based on ITB project specifications. Datasheets and plot plan development and other Electrical Deliverables such as:
1- SLD and Key One Line Diagram
2-Load List
3-Cable sizing calculation, Cable Schedule, and Cable Tie-In Schedule.
4-Lightning and Grounding calculation and Layout
5-Lighting Calculation and Lighting Layout
6-Ground Grid Calculation and Layout
7-Cable Routing Layout and Installation details
8-Fire protection and fire fighting system
9-Data Sheets of electrical equipment
10-Quotation Review
11-RFQ
12-MTO (Material Take Off)
13-BOQ (Bill of Quantity)
14-Engineering Specifications
Regards
Abubakar
Project Scale
BuildingBuilding Type
Commercial, Industrial, ResidentialFile Format
3DS, BLEND, DAE, DWG, JPG, MA, MB, OBJ, PDF, RVT, SKP, SLDPRT, STLWhat's included
| Service Tiers |
Starter
$100
|
Standard
$300
|
Advanced
$600
|
|---|---|---|---|
| Delivery Time | 3 days | 9 days | 18 days |
Number of Revisions | 2 | 5 | 8 |
Number of 2D Drawings | 3 | 15 | 30 |
High Level of Details | |||
Graphic Enhancements | |||
Source Files | |||
Layout Sheets |
89 reviews
(80)
(4)
(4)
(1)
(0)
This project doesn't have any reviews.
AK
Alaric K.
Apr 13, 2026
Senior Electronics Engineer: HF RF Antenna Design (13.56MHz) & High-Current PCB Layout (10A)
AO
Anders O.
Apr 9, 2026
30 minute consultation
Very good focused consultation on the subject we asked about!
BC
Brian C.
Apr 2, 2026
Add Electrical Components and BOM to Existing Design Files
JA
Jayla A.
Mar 13, 2026
3D CAD Model Creation for Premium Salon Appliance
IJ
Irdin J.
Oct 29, 2025
Reverse engineering candle light
About Abubakar
Electrical and Electronic Design Engineer
100%
Job Success
Islamabad, Pakistan - 7:15 am local time
🏆 𝗧𝗼𝗽 𝗥𝗮𝘁𝗲𝗱 𝗣𝗹𝘂𝘀 | ⭐ 𝟭𝟬𝟬+ 𝗛𝗮𝗽𝗽𝘆 𝗖𝗹𝗶𝗲𝗻𝘁𝘀 | ⏱️ 𝟯𝟮𝟮𝟱+ 𝗛𝗼𝘂𝗿𝘀 𝗼𝗻 𝗨𝗽𝘄𝗼𝗿𝗸
Looking for an Electrical Design Engineer who can take your project from concept to manufacturing while ensuring technical accuracy and industry compliance? You're in the right place.
I am an Electrical Design Engineer with 7+ years of experience delivering complete engineering solutions for startups, manufacturers, EPC contractors, engineering consultants, and commercial clients worldwide. My expertise includes Electrical Design, MEP Engineering, Lighting Design, Power System Engineering, PCB Design, Embedded Electronics, SolidWorks Product Design, and Manufacturing Support.
𝗘𝗹𝗲𝗰𝘁𝗿𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻 & 𝗠𝗘𝗣 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴
I provide complete electrical engineering solutions for residential, commercial, and industrial projects in accordance with international standards. Services include:
✔ Single Line Diagrams (SLD)
✔ Electrical Power & Lighting Layouts
✔ DIALux EVO Lighting Calculations
✔ Electrical Load & Cable Sizing Calculations
✔ Panel Board & DB Schedules
✔ Grounding & Lightning Protection
✔ Cable Routing Layouts
✔ Low Voltage Systems
✔ Fire Alarm, CCTV & Data Systems
✔ Solar PV Design
✔ BOQ, MTO & Engineering Documentation
✔ Construction & Permit Drawings
I also perform Load Flow, Short Circuit, Relay Coordination, Motor Starting, Harmonic Analysis, and Power System Studies using ETAP, and SKM
𝗣𝗖𝗕 𝗗𝗲𝘀𝗶𝗴𝗻 & 𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘃𝗲𝗹𝗼𝗽𝗺𝗲𝗻𝘁
I design production-ready electronic hardware from schematic to manufacturing. Services include:
✔ Schematic Design
✔ Multi-Layer PCB Layout
✔ Component Selection & BOM
✔ Footprint & Library Creation
✔ DFM / DFA Optimization
✔ Gerber & Manufacturing Files
✔ PCB Debugging
✔ Reverse Engineering
✔ Prototype Validation
I have experience developing PCBs for industrial automation, IoT devices, consumer electronics, EV systems, battery management systems, and embedded products.
𝗘𝗺𝗯𝗲𝗱𝗱𝗲𝗱 & 𝗠𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹 𝗗𝗲𝘀𝗶𝗴𝗻
✔ STM32, Arduino, ARM & PIC-based Embedded Systems
✔ BLE & Wireless Integration
✔ SolidWorks 3D Modeling
✔ Product Enclosure Design
✔ Mechanical Assemblies
✔ 3D Printable Models, Die Molding
✔ Manufacturing Drawings
𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗦𝗼𝗳𝘁𝘄𝗮𝗿𝗲
𝗘𝗹𝗲𝗰𝘁𝗿𝗶𝗰𝗮𝗹: SolidWorks Electrical, AutoCAD Electrical, MEP, Revit, ETAP, DIALux EVO, SKM, ETAP.
𝗣𝗖𝗕: Altium Designer, KiCad, EasyEDA, Eagle PCB, Proteus, CircuitMaker
𝗠𝗲𝗰𝗵𝗮𝗻𝗶𝗰𝗮𝗹: SolidWorks
𝗪𝗵𝘆 𝗖𝗹𝗶𝗲𝗻𝘁𝘀 𝗖𝗵𝗼𝗼𝘀𝗲 𝗠𝗲
✔ Top Rated Plus with 100+ satisfied clients
✔ 3225+ successful project hours
✔ End-to-end engineering support
✔ Manufacturing-ready deliverables
✔ Strong knowledge of UL, IEC & international engineering standards
✔ Clear communication and reliable project delivery
Message with your DWG/PDF + code requirements for a free scope review. Let's discuss your project and build a solution that is accurate, efficient, and ready for construction/manufacturing.
Steps for completing your project
After purchasing the project, send requirements so Abubakar can start the project.
Delivery time starts when Abubakar receives requirements from you.
Abubakar works on your project following the steps below.
Revisions may occur after the delivery date.
60% package Submission
When the work starts, I always provide 1st progress which includes 60% package/work of the project for client review.
90% Package Submission.
After getting a review of 60%Package, I always provide 2nd progress which includes 90% package/work of the project for client review.