You will get a custom PCB design for your nRF , ESP32, STM32, or IoT project
Top Rated
Project details
You get a production-ready PCB — not a draft that bounces back from the fab.Every board I deliver includes complete Gerbers, BOM with LCSC part numbers,CPL for SMT assembly, a 3D model, and an annotated schematic PDF. I design around your exact MCU and constraints, not a generic template.
I have shipped 180+ PCB projects — including a four-layer circular ESP32-C6 smart LED board, a compact GPS pet tracker with Quectel BG95 LTE, and an AI-powered robotic inspection system controller. Every design goes through afull DRC pass and JLCPCB constraint check before you see it.
With 400+ reviews at 4.9 stars on Upwork, you can order with confidence. Message me before placing an order — I will confirm the right scope and tierin one exchange so there are no surprises on either side.
I have shipped 180+ PCB projects — including a four-layer circular ESP32-C6 smart LED board, a compact GPS pet tracker with Quectel BG95 LTE, and an AI-powered robotic inspection system controller. Every design goes through afull DRC pass and JLCPCB constraint check before you see it.
With 400+ reviews at 4.9 stars on Upwork, you can order with confidence. Message me before placing an order — I will confirm the right scope and tierin one exchange so there are no surprises on either side.
What's included
| Service Tiers |
Starter
$250
|
Standard
$700
|
Advanced
$1,600
|
|---|---|---|---|
| Delivery Time | 5 days | 10 days | 18 days |
Number of Revisions | 1 | 2 | 3 |
Optional add-ons
You can add these on the next page.
Additional Revision
+$50Frequently asked questions
351 reviews
(328)
(17)
(5)
(0)
(1)
This project doesn't have any reviews.
JB
Jimmy B.
Jul 13, 2026
Senior PCB Design Engineer for Nordic nRF52840 Wearable BLE Device
Ahmed was communicative and did a great job steering the project to where it needed to go. He delivered on his projected timeframes and provided high quality results.
RH
Robert H.
Jul 8, 2026
RevC of PCB design
Ahmed has helped me to complete several projects now. I had a detailed plan of attack for this PCB revision, but Ahmed caught issues that would have lead to another revision if not corrected before production. I appreciate his honesty, communication and responsiveness to concerns that I bring up. As other projects arise I will definitely reach out again to Ahmed for his assistance.
SC
Samuel C.
May 25, 2026
Raspberry Pi Kiosk System Setup with Speech-to-Text Capabilities
I selected Ahmed for my project, not because he was the cheapest candidate for the job, but because he saw into my project in great detail, and provided specific guidance on how to accomplish it. Throughout the whole process, Ahmed has been very competent, nice to work with, and kept the project moving until it was completed.
JA
Josh A.
May 12, 2026
Custom ESP32-C6 Smart Light PCB — Revision (Rev B)
This is my second time working with Ahmed. He did a great job again on my PCB design. High quality, on time, great communication.
SA
Shad A.
May 4, 2026
Design Compact LTE + GPS IoT Controller
Ahmed and his team of engineers are excellent to work with. They took my initial requirements and turned them into a fully realized solution. Their work across software, hardware, and mechanical design was spot on.
The team was creative, responsive, and highly flexible as my needs evolved, accommodating small changes along the way without issue. They also conducted extensive remote testing and guided me throughout the entire process, which was especially valuable given my limited experience with PCBs and electronics.
I'm looking forward to working with Ahmed and his team again in the future!
The team was creative, responsive, and highly flexible as my needs evolved, accommodating small changes along the way without issue. They also conducted extensive remote testing and guided me throughout the entire process, which was especially valuable given my limited experience with PCBs and electronics.
I'm looking forward to working with Ahmed and his team again in the future!
About Ahmed
Embedded Systems & Firmware Engineer | PCB/PCBA | Edge AI & IoT
100%
Job Success
Cairo, Egypt - 5:01 pm local time
Hundred clients have come back for a second project. Here's what's behind that number.
I take products from napkin sketch to factory floor — designing the PCBs, writing the firmware, and optimizing the BOMs. That DFM work alone typically saves clients 20–30% on production costs. One client shipped at 12mA after coming to me with a prototype drawing 800mA in sleep mode. That's the difference between a redesign and a launch.
The firmware I write runs 24/7 in industrial environments where a crash at 2 AM means someone's driving to a job site. I build for reliability first: FreeRTOS or bare-metal on STM32, ESP32, nRF52/53, RP2040, PIC, and Atmel. Connectivity — MQTT, BLE, Wi-Fi, LoRa, or cellular — gets chosen for the use case, not the trend.
On the hardware side: multi-layer PCBs, proper signal integrity, IPC-compliant layouts (2221, 7351) in Altium and KiCad, built for manufacturability from day one. When the project calls for it, I wire the full IoT stack — AWS IoT Core, edge AI/ML inference, secure OTA, and fleet health monitoring.
Top-Rated Plus. 100% Job Success Score.
If you need an engineer who thinks in yield rates, field reliability, and unit economics — hit "Message" or "Invite to Job." Let's get your product out the door.
Steps for completing your project
After purchasing the project, send requirements so Ahmed can start the project.
Delivery time starts when Ahmed receives requirements from you.
Ahmed works on your project following the steps below.
Revisions may occur after the delivery date.
Requirements Review & Scope Confirmation
Review your specs, confirm tier scope, and clarify any technical questions before starting work.
Schematic Capture & Component Selection
Draw full schematic in KiCad, select components with LCSC part numbers, and share for your review.