Hire the best Analog Electronics Specialists in Bengaluru, IN

Check out Analog Electronics Specialists in Bengaluru, IN with the skills you need for your next job.
  • $30 hourly
    I am a qualified PCB design engineer with 12+ years’ experience in the design of electronic systems, PCB Designs and embedded firmware, working full-time freelance. I have experience in various areas of electronic design, including embedded systems, analog circuits, digital circuits, TFT display drivers, LVDS, communication systems, high power switching controls, low power battery-operated devices, battery charging algorithms, Audio Amplifiers, sensors, medical systems, Micro controller (AVR, ARM, PIC, Renesas) based systems and designs. ----------------------------------------------------------------------------------------------------------------- Feel Free to contact me to discuss your project. If you require, I can also assist you in formulating the complete project requirements by recommending suitable technology. No matter what your technical background is, I can transform your product idea into reality using the best and most efficient technology available. If you require I can also fully assist you into moving your product to production, recommending suitable suppliers and providing full technical assistance during the entire process. ----------------------------------------------------------------------------------------------------------------- Some more details about my design experience. Circuits, Schematic & PCB design from ground. Circuit analyzing and debugging. Good in Power Circuits, analog circuits, sensitive circuits, medical circuits. Have good experiences to design the Footprint of the elements and their 3D model and link to the PCB layout. So enable to see the prototype of the designed circuit with 3d. Expert of the Length matching for impedance of the high frequency circuit, Multi-layer designed and added logo images. Enable to make the Gerber and BOM files and manufacture them and soldering too. And to test and shipping to anywhere. EMI/ EMC considerations for Layouts and Signal integrity. Design to ensure minimum noise level for power circuits and signals. PCB optimizing. Tools: Altium designer, Dip trace, OrCAD, Eagle. I have specific microcontroller experience with: - ST: STM32 ARM Cortex series - Renesas : R8C, RX68 series - Microchip: PIC (various) - NXP: 8051 series - Atmel: Atmega, Attiny, Atxmega, AT90CAN, and AVR32 series ----------------------------------------------------------------------------------------------------------------- Past product development experiences highlights include: - Schematic/PCB design of a high performance ARM Cortex-ST32 embedded system with 1024*768 TFT display controlling from a simple micro controller. The output can be taken in the format, Both LVDS and VGA. SD card is associated with the system for saving images. Best display option for microcontroller-based cheap systems for displaying large screens and audio. USB support too. I am done with the embedded software support for the same. - Schematic/PCB design for medical ECG system. Very very low input signal, many stages of amplification, analog filters, ADCs included. Software algorithms are used. - Schematic/PCB design of LI Ion charging system most efficient and cheap. - Schematic/PCB design of a high speed SPI, I2C, communication system, which needs termination and impedance matching. - Schematic/PCB design of isolated power supply. Which should less than 1% noise, obeying ISO-60601 for medical applications. - Schematic/PCB design of ZigBee/IEEE 802.15.4 and 6loWPAN wireless devices both on 2.4GHz band as well as sub-1Ghz (915MHz/868MHz/433MHz) bands with custom PCB trace antenna / external antenna and antenna matching circuit. Also developed related firmware. - Various Schematic/PCB/Firmware design project for high power solid state switching power circuit and motor controls thermal management controls.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    nRF52
    Mechanical Design
    Mobile App
    Wearable Technology
    Altium Designer
    Digital Electronics
    Embedded C
    PCB Design
    STM32
    Reverse Engineering
    ESP32
    Circuit Design
    Medical Device
  • $7 hourly
    I have expertise in Power electronics, lithium EV batteries, Battery management system, Hardware design power budget, simulation, board bringup, having knowledge on Environmental test, radiation test etc.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Electronic Workbench
    Engineering & Architecture
    Electrical Engineering
    Analog Circuit
    Hardware Troubleshooting
  • $28 hourly
    Professional Summary Enthusiastic and detail-oriented Electronics and communication undergraduate seeking an entry-level position to apply my analytical and problem-solving skills, along with my strong foundation in machine learning and data analysis, to contribute to a dynamic team and drive data-driven decision-making.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Artificial Intelligence
    Machine Learning Model
    Machine Learning
  • $40 hourly
    5+ years of experience in analog layout PMIC. Worked on TSMC 130 to 22 nm nodes. Delivered 3 projects. Hands on experience on cadence virtuoso, drc , lvs.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Layout Design
  • $10 hourly
    I am an experienced Analog Mixed Signal Layout Engineer predominantly worked on Realtime Projects like SERDES, DDR, PLL and IO Blocks. Worked on cutting Edge Technologies in 28nm, 22nm, 14nm and 7nm FDSOI & Finfet in TSMC. Very good at taking care of Critical Matching of Transistors in Current Mirrors and Differential Pairs. Well Versed in clearing EM and IR issues, Latchup and Antenna Errors in Layouts. Well Versed in doing layouts those are prone to ESD and Latchup. Worked on Opamp, BGR and LDO. various kind of GPIO cells that interface the Core Domain and Outside Voltage Domain. Very good at Shell scripting, SKILL scripting to automate some Analog Layout Tasks easily during Layout Porting work from one Metal stack to other Metal stack and viceversa.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Analog Circuit
    Layout Design
  • $10 hourly
    As a senior electrical design engineer at Aptiv, I apply my MTech degree in power electronics and my skills in power converters, automotive, and product development to create innovative and efficient solutions for the mobility industry. I have over two years of experience working at Aptiv, starting as an engineering intern in 2021 and then becoming a full-time electrical design engineer in 2022. I have contributed to several projects involving the design, testing, and optimization of power electronic devices and systems for various applications, such as electric vehicles, hybrid vehicles, and charging stations. I am passionate about advancing the field of power electronics and enhancing the performance, safety, and sustainability of mobility products and services. I am also committed to continuous learning and improvement, and I value teamwork, collaboration, and customer satisfaction.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Digital Electronics
    Electrical Engineering
    Schematic Capture
    Power Electronics
    Automotive
    Circuit Design
  • $25 hourly
    CAREER OBJECTIVE To gain position as a Electronic Circuit and system Design Engineer with company in which to practice my abilities and enhance my skills to the fullest PROFILE SUMMARY * Experience in Electronics control Units development for Braking systems based on automotive standards. (LV124, VDA). * Experience in Hardware development (FPGA, uC based) of Timing and RF Systems based on Mil Standard. (Ex: MIL-STD-750,461, DO-254) . * Experience in end-to-end Electronics product development with exposure in all stages of development process from Requirement Analysis, High-level/Low level design, Development, Field Integration and Quality/Acceptance test's for Mil and Automotive grad-Qualified systems. * Customer handling and ECU development experience onsite (Germany). * Experience in RTL Design (VHDL/Verilog), mixed signal circuit design, Firmware design & Development of ARM
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Science
    Teaching
    FPGA
    Microcontroller Programming
    Automotive Design
    Digital Electronics
    Hardware Design
    Python
    SystemVerilog
    Verilog
    VHDL
    C
  • $40 hourly
    I am an experienced Electronic Design engineer with more than 7 years of experience in power electronics, analog and digital electronics, Microcontrollers including PCB design. I have worked for Home Appliance (Electronics Control Unit for Washer,Refrigerator,Capacitive Touch Panels) and Automotive electronics products (BLDC Motors,Brushed Motor for Window lift, Human Machine Interface (Dash board panel,Capacitive Touch Steering Wheel Switch,Electronics Gear hifter )etc. I have designed electronics products from scratch to mass production (including pre-production and production support). I have deep knowledge ON EMI/EMC . Resolved many issues related to them.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Power Electronics
    Digital Electronics
    Schematic
    Requirement Analysis
    Hardware Troubleshooting
    Electronic Circuit Design
    Hardware Design
    PCB Design
  • $10 hourly
    OBJECTIVE Interested in the field of layout design, with the main aim being to learn new things and apply technology that offers professional growth while being resourceful, innovative and flexible. * Experience Summary and Knowledge of Layout design (Qualcomm client) * Cadence Virtuouso in XL and EXL layout * All type of DRC, ERC & Soft Check for N3E * All type of LVS * Pure analog and mixed cells * Thin Devices 3nm (N3E) Fin-Fet (TSMC Foundry) * Thick Devices (having 55nm and 86nm gate length) * Floor plan of all types of cells (analog cell, digital cell, thick devices & mixed cell) * Placement of Guard Ring around analog cells * Placement of endcaps around the device * Placement of Capacitor & resistors and their routing * Understanding of analog cells like endcaps, active cells (single fet, parallel fet, & stack fet etc.). * Understanding of different kind of abutment
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    RF Design
    Digital Design
    Analog Circuit
    Layout Design
  • $10 hourly
    Hello, I'm Azeem, a B.Tech student at PES University in Bangalore. Passionate about VLSI, I enjoy crafting and validating Digital and Analog Designs using tools like Cadence and other EDA/CAD tools. My expertise extends to Signal Processing with SDRs. Alongside my tech pursuits, I stay updated on mobile technology. In my downtime, I indulge in the world of mobile games. Projects #Simple Virtual Assistant - A virtual assistant that can perform few tasks based on voice inputs - It is made using python speech modules and by invoking API to get desired website based on keyword matching. #Risc V Implementation of BFS (Codasip, Quartus Prime Lite, C, Assembly, Verilog ) - BFS Algorithm is tested to understand code complexity and simplified using reduction techniques in Codasip Tool - Risc V implementation is done to go through the execution and optimization #Cognitive Radio (MATLAB, GNU Radio, Adalm Pluto SDR, ML, Neural Network) - Cognitive Radio working and process is discussed and implemented to deeply get to know about spectrum sensing and decision making - Matlab and GNU radio : For programming and processing of real time signals and creating co-operative sensing # SRAM Memory and Full Adder using Virtuoso Cadence - 4x4 SRAM Memory Design and Verification # RTL to GDS to Tapeout using Openlane and E-fabless - Full Openlane Flow of self made traffic light controller design and took part in E-fabless open shuttle Achievements.. #Eyantra Innovation Challenge 2023 - IIT Bombay - Semifinalist..
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Perl
    MATLAB
    Digital Design
    Analog Circuit
    Python
    VLSI
    C++
    Specifications
    Python Script
    Embedded System
  • $3 hourly
    Experienced Analog design engineer interested in low power circuit design. Currently working as Project associate in NIT , Trichy. Have 2+ years of experience in Analog IC design, from spec definition , circuit implementation , physical layout.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Schematic Capture
    Layout Design
    PCB Design
    Digital Electronics
    Analog Circuit
    Cadence Platform
    C
  • $15 hourly
    Work Experience IP Design Activities * Design of blocks like Predriver, Charge pump, Oscillators, Buck converter, Overcurrent Protection, SOA protection, Power up and Bias blocks (Bandgap, IREF, LDO, Pin sensing, Voltage Monitors), Comparators for motor control signal path * Expertise on high voltage (60V) design (key concerns) * ESD Verification of chip top to meet HBM and CDM rules * AMS design experience in mixed signal flow - modeling of critical blocks and RTL coding for digital controller for analog blocks Design Lead Activities * Direct engagement with customer on definition of specifications for the system * System Level Analysis of end product scenario and discussions with system engineer to conclude on block level specifications to be met - performance/cost tradeoff * Defining control and timing of signals in analog-digital interface * Working with AMS verification team to define test cases and review of waveforms
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Analog Circuit
  • $3 hourly
    I am electrical engineer with experience in developing designs that meet customer requirements. I also can write impactful content on environment and sustainability related issues.
    vsuc_fltilesrefresh_TrophyIcon Analog Electronics
    Digital Electronics
    Electronic Circuit Design
    National Electrical Code
    Electrical Drawing
    Writing
    Electrical Layout Design
    Electrical Design
  • Want to browse more freelancers?
    Sign up

How hiring on Upwork works

1. Post a job (it’s free)

Tell us what you need. Provide as many details as possible, but don’t worry about getting it perfect.

2. Talent comes to you

Get qualified proposals within 24 hours, and meet the candidates you’re excited about. Hire as soon as you’re ready.

3. Collaborate easily

Use Upwork to chat or video call, share files, and track project progress right from the app.

4. Payment simplified

Receive invoices and make payments through Upwork. Only pay for work you authorize.

Trusted by

How do I hire a Analog Electronics Specialist near Bengaluru, on Upwork?

You can hire a Analog Electronics Specialist near Bengaluru, on Upwork in four simple steps:

  • Create a job post tailored to your Analog Electronics Specialist project scope. We’ll walk you through the process step by step.
  • Browse top Analog Electronics Specialist talent on Upwork and invite them to your project.
  • Once the proposals start flowing in, create a shortlist of top Analog Electronics Specialist profiles and interview.
  • Hire the right Analog Electronics Specialist for your project from Upwork, the world’s largest work marketplace.

At Upwork, we believe talent staffing should be easy.

How much does it cost to hire a Analog Electronics Specialist?

Rates charged by Analog Electronics Specialists on Upwork can vary with a number of factors including experience, location, and market conditions. See hourly rates for in-demand skills on Upwork.

Why hire a Analog Electronics Specialist near Bengaluru, on Upwork?

As the world’s work marketplace, we connect highly-skilled freelance Analog Electronics Specialists and businesses and help them build trusted, long-term relationships so they can achieve more together. Let us help you build the dream Analog Electronics Specialist team you need to succeed.

Can I hire a Analog Electronics Specialist near Bengaluru, within 24 hours on Upwork?

Depending on availability and the quality of your job post, it’s entirely possible to sign up for Upwork and receive Analog Electronics Specialist proposals within 24 hours of posting a job description.